An update, I gave my Zgemma to a friend for testing. He just plugged it in and all was working! So the problem looks like out of the oscam or box.
Can this mean that my ISP is blocking and I should get a vpn on the box?
Or I should do something with my tuner/antenna?
I have few c lines and with help received in the other forum thread new Oscam setup with c lines I managed to set up the oscam, but it turned out that my Zgemma H11S and Oscam are not connecting. Whenever I change channels, no information is shared with oscam.
Has anyone an idea what I can do to fix that?
Enigma2 7.2 33367+8d169ae
openATV 7.3
cortexa15hf-neon-vfpv4
So, servers were checked and are working. This mean that my box is not collaborating with oscam... Any idea what setup I should look for?
Comparing the first line given by Panda555 I see a difference, and nothing beyond that. I don't see any channels at all.
2024/06/19 22:21:08 535B844B c (client) plain dvbapi-client granted (dvbapi, au=auto (9 reader))
2024/06/19 22:21:08 535B844B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2024/06/19 22:21:08 535B844B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
But my previous post with log snapshot was taken while i was switching channels on my box. To clarify, I have copied it from Live Log tab while having show All set in settings.
Or is there any other log or setting I should use?
Still it doesn't work with your files but I have noticed the status page changed. Where on top 2 servers appeared and client on the bottom.
In the meantime I have asked a colleague to check my c lines on his setup, he uses a bit older Zgemma box H9S SE but has working tv. I will let you know.
Theoretically, in the webif if all is connected and working, is there any additional information visible? Last Channel / LB Value Reader / ECMs are updating?
I did as you wrote, removed all previous oscam-emu settings. Downloaded and installed MOHAMED_OS 2.24.06-11791-801 and adjusted pasted conf files to the conf folder [i didn't create those from scratch but copied as per our previous conversation] and now it is etc/tuxbox/conf/ but nothing changes.
snapshot from log while jumping through some channels:
2024/06/17 23:05:56 00000000 (work) start reader thread action 13
2024/06/17 23:05:56 00000000 (main) starting thread client work
2024/06/17 23:05:56 00000000 (main) client work thread started
2024/06/17 23:05:56 11B9F823 r (work) data from add_job action=13 client r emulator
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 1
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 2
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 3
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 4
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 5
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 6
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 7
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 8
2024/06/17 23:05:56 267F4D63 c (dvbapi) New events occurred on 1 of 1 handlers after 492007 ms inactivity
2024/06/17 23:05:56 267F4D63 c (dvbapi) Now handling fd 7 that reported event 17
2024/06/17 23:05:56 267F4D63 c (dvbapi) Socket 7 reported hard connection close
2024/06/17 23:05:56 267F4D63 c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
2024/06/17 23:05:56 267F4D63 c (dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 7)
2024/06/17 23:05:57 00000000 (main) starting thread client work
2024/06/17 23:05:57 00000000 (main) client work thread started
2024/06/17 23:05:57 11B9F823 r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2024/06/17 23:05:57 00000000 (work) start reader thread action 13
2024/06/17 23:05:57 00000000 (main) starting thread client work
2024/06/17 23:05:57 00000000 (main) client work thread started
2024/06/17 23:05:57 11B9F823 r (work) data from add_job action=13 client r emulator
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 1
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 2
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 3
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 4
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 5
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 6
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 7
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 8
So the oscam_cycec is not listed in any plugins list, I have verified all categories including system hidden ones.
But then I was checking all other installed plugins, and this cycec one goes from S4A Updater plugin where I have found an option to quickly change Oscam versions from Mohamed_Os/Kitte888/Levi45/CyCeC/Samur and this actually changes the description while checking the oscam status on webif. However the config path used for all files used by oscam-cycec goes to etc/tuxbox/config/oscam-emu/
For images, not sure exactly what do you mean but will list potential details:
Enigma2 7.2 33367+8d169ae
openATV 7.3
cortexa15hf-neon-vfpv4
arm
I can install from the plugin list oscam-emu(11791+f24e8ed-r0)
oscam-emu-ipv4only(11791-F24e8ed-r0)
oscam-smod(1.20+01bc9cd-r2)
oscam-smod(1.20+01bc9cd-r2)
oscam-stable(1.30)
oscam-stable-ipv4only(1.30)
oscam-trunk(11791+6f13955-r0)
Oscam available in s4a updater I see:
Mohamed19OS OSCam11719-798
kitte888 OSCam11725-798v9r26
levi45 OSCam11724-798
Jej@n CyCeC+OSCam11779-Mega852
SAMUR OSCam11719-798
Also I have just thought that my c lines are not working, but tried with some free 24h trial I found on web and also no channels visible.
The new oscam-emu path that is used by Webif directs to etc /tuxbox/config/oscam-emu where all edited files are saved, edited the user but nothing changed.
Not being able to remove the oscam_cycec I think it will always create sub folder.
My bad, failed so much before reaching out to you.
The oscam CyCecplus was installed by the box vendor. Now I have removed all other cccam/oscam plugins, however I cannot remove this CyCecplus as it is not visible on any list. With this one remaining I have re-installed oscam-emu 11790 which is available in my plugin repository applied previously shared files and yours emulator details.
Starting almost from the scratch, the case at least moved a bit as Keys are loaded.
Also I figured out how to have more detailed log, so when changing channels (white ones):
2024/06/15 21:48:37 00000000 >> OSCam << cardserver log switched, version 2.24.06-11790-801@6d85d07d (arm-oe-linux-gnueabi)
2024/06/15 21:48:37 00000000 (work) add reader job action 13 queue length 1 7
2024/06/15 21:48:37 00000000 (work) add reader job action 13 queue length 1 8
2024/06/15 21:48:37 51652C0B h (webif) WebIf: Origin checked. Result: access from x => allowed
2024/06/15 21:48:37 00000000 (main) starting thread client work
2024/06/15 21:48:37 00000000 (main) client work thread started
2024/06/15 21:48:37 27805C0A r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2024/06/15 21:48:38 00000000 (work) start reader thread action 13
2024/06/15 21:48:38 00000000 (main) starting thread client work
2024/06/15 21:48:38 00000000 (main) client work thread started
2024/06/15 21:48:38 27805C0A r (work) data from add_job action=13 client r emulator
2024/06/15 21:48:38 00000000 (work) add reader job action 13 queue length 1 1
2024/06/15 21:48:38 00000000 (work) add reader job action 13 queue length 1 2
2024/06/15 21:48:38 00000000 (work) add reader job action 13 queue length 1 3
2024/06/15 21:48:38 00000000 (work) add reader job action 13 queue length 1 4
2024/06/15 21:48:38 00000000 (work) add reader job action 13 queue length 1 5
2024/06/15 21:48:38 00000000 (work) add reader job action 13 queue length 1 6
2024/06/15 21:48:38 00000000 (work) add reader job action 13 queue length 1 7
2024/06/15 21:48:38 00000000 (work) add reader job action 13 queue length 1 8
2024/06/15 21:48:38 51652C0B h (webif) WebIf: Origin checked. Result: access from x => allowed
2024/06/15 21:48:38 00000000 (main) starting thread client work
2024/06/15 21:48:38 00000000 (main) client work thread started
2024/06/15 21:48:38 27805C0A r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2024/06/15 21:48:39 00000000 (work) start reader thread action 13
2024/06/15 21:48:39 00000000 (main) starting thread client work
2024/06/15 21:48:39 00000000 (main) client work thread started
2024/06/15 21:48:39 27805C0A r (work) data from add_job action=13 client r emulator
2024/06/15 21:48:39 00000000 (work) add reader job action 13 queue length 1 1
2024/06/15 21:48:39 62337B64 p (work) add reader job action 1 queue length 2 1
2024/06/15 21:48:39 7C8EFE86 p (work) add reader job action 1 queue length 2 2
2024/06/15 21:48:39 62337B64 p (cccam) cccam: send:
2024/06/15 21:48:39 62337B64 p (cccam) 00 06 00 00
2024/06/15 21:48:39 7C8EFE86 p (cccam) 00 06 00 00
2024/06/15 21:48:39 7C8EFE86 p (-) -- Skipped 1 duplicated log lines --
2024/06/15 21:48:39 7C8EFE86 p (cccam) cccam: keepalive
2024/06/15 21:48:39 00000000 (work) add reader job action 13 queue length 1 2
2024/06/15 21:48:39 62337B64 p (cccam) cccam: keepalive
2024/06/15 21:48:39 00000000 (work) add reader job action 13 queue length 1 3
2024/06/15 21:48:39 430618AF p (work) add reader job action 1 queue length 2 3
2024/06/15 21:48:39 00000000 (work) add reader job action 13 queue length 1 4
2024/06/15 21:48:39 00000000 (work) add reader job action 13 queue length 1 5
2024/06/15 21:48:39 59B8F57C p (work) add reader job action 1 queue length 2 4
2024/06/15 21:48:39 59B8F57C p (cccam) cccam: send:
2024/06/15 21:48:39 59B8F57C p (cccam) 00 06 00 00
2024/06/15 21:48:39 59B8F57C p (cccam) cccam: keepalive
2024/06/15 21:48:39 75F5A736 p (work) add reader job action 1 queue length 2 6
2024/06/15 21:48:39 75F5A736 p (cccam) cccam: send:
2024/06/15 21:48:39 75F5A736 p (cccam) 00 06 00 00
2024/06/15 21:48:39 75F5A736 p (cccam) cccam: keepalive
2024/06/15 21:48:39 430618AF p (cccam) cccam: send:
2024/06/15 21:48:39 430618AF p (cccam) 00 06 00 00
2024/06/15 21:48:39 6BF9E6A0 p (work) add reader job action 1 queue length 2 5
2024/06/15 21:48:39 00000000 (work) add reader job action 13 queue length 1 6
2024/06/15 21:48:39 430618AF p (cccam) cccam: keepalive
2024/06/15 21:48:39 6BF9E6A0 p (cccam) cccam: send:
2024/06/15 21:48:39 6BF9E6A0 p (cccam) 00 06 00 00
2024/06/15 21:48:39 00000000 (work) add reader job action 13 queue length 1 7
2024/06/15 21:48:39 00000000 (work) add reader job action 13 queue length 1 8
2024/06/15 21:48:39 5AB3B028 p (work) add reader job action 1 queue length 2 8
2024/06/15 21:48:39 6BF9E6A0 p (cccam) cccam: keepalive
2024/06/15 21:48:39 3F839108 p (work) add reader job action 1 queue length 2 7
2024/06/15 21:48:39 5AB3B028 p (cccam) cccam: send:
2024/06/15 21:48:39 5AB3B028 p (cccam) 00 06 00 00
2024/06/15 21:48:39 3F839108 p (cccam) 00 06 00 00
2024/06/15 21:48:39 5AB3B028 p (-) -- Skipped 1 duplicated log lines --
2024/06/15 21:48:39 5AB3B028 p (cccam) cccam: keepalive
2024/06/15 21:48:39 75F5A736 p (-) -- Skipped 1 duplicated log lines --
2024/06/15 21:48:39 75F5A736 p (work) [OSCAM-WORK] new event 1 occurred on fd 14 after 12999 ms inactivity
2024/06/15 21:48:39 75F5A736 p (cccam) cccam(r) 6: parse_msg=6
2024/06/15 21:48:39 75F5A736 p (reader) 6 [cccam] cc_parse_msg: receive keepalive
2024/06/15 21:48:39 5AB3B028 p (work) [OSCAM-WORK] new event 1 occurred on fd 16 after 13027 ms inactivity
2024/06/15 21:48:39 5AB3B028 p (cccam) cccam(r) 8: parse_msg=6
2024/06/15 21:48:39 5AB3B028 p (reader) 8 [cccam] cc_parse_msg: receive keepalive
2024/06/15 21:48:39 3F839108 p (work) [OSCAM-WORK] new event 1 occurred on fd 10 after 13015 ms inactivity
2024/06/15 21:48:39 3F839108 p (cccam) cccam(r) 7: parse_msg=6
2024/06/15 21:48:39 3F839108 p (reader) 7 [cccam] cc_parse_msg: receive keepalive
2024/06/15 21:48:39 430618AF p (work) [OSCAM-WORK] new event 1 occurred on fd 5 after 13019 ms inactivity
2024/06/15 21:48:39 430618AF p (cccam) cccam(r) 3: parse_msg=6
2024/06/15 21:48:39 430618AF p (reader) 3 [cccam] cc_parse_msg: receive keepalive
2024/06/15 21:48:39 6BF9E6A0 p (work) [OSCAM-WORK] new event 1 occurred on fd 11 after 13036 ms inactivity
2024/06/15 21:48:39 6BF9E6A0 p (cccam) cccam(r) 5: parse_msg=6
2024/06/15 21:48:39 6BF9E6A0 p (reader) 5 [cccam] cc_parse_msg: receive keepalive
2024/06/15 21:48:39 7C8EFE86 p (work) [OSCAM-WORK] new event 1 occurred on fd 15 after 13034 ms inactivity
2024/06/15 21:48:39 7C8EFE86 p (cccam) cccam(r) 2: parse_msg=6
2024/06/15 21:48:39 7C8EFE86 p (reader) 2 [cccam] cc_parse_msg: receive keepalive
2024/06/15 21:48:39 59B8F57C p (work) [OSCAM-WORK] new event 1 occurred on fd 12 after 13052 ms inactivity
2024/06/15 21:48:39 59B8F57C p (cccam) cccam(r) 4: parse_msg=6
2024/06/15 21:48:39 59B8F57C p (reader) 4 [cccam] cc_parse_msg: receive keepalive
2024/06/15 21:48:39 62337B64 p (work) [OSCAM-WORK] new event 1 occurred on fd 13 after 13076 ms inactivity
2024/06/15 21:48:39 62337B64 p (cccam) cccam(r) 1: parse_msg=6
2024/06/15 21:48:39 62337B64 p (reader) 1 [cccam] cc_parse_msg: receive keepalive
Still not helpful, but now I wonder if I should get some connection between Oscam and Zgemma box? Like a client listed?
Trying Panda555's approach I got just this after applying your code:
2024/06/15 13:30:11 2DFA1BCD r (reader) emulator [unknown] Cannot open device: emulator
Now, after removing the emu reader. The file and log after switching channels goes like below, without any improvements. Even after switching lots of channels, no live log entries appear.
Silly questions, but does the tuner box automatically gets to know that should treat Oscam as a tv provider? Also, shouldn't channels be searched over the oscam servers also to verify if these are valid?
oscam.server
[reader]
label = 1
protocol = cccam_mcs
device = xxx
user = xxx
password = xxx
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
cccwantemu = 1
ccckeepalive = 1
[reader]
label = 2
protocol = cccam_mcs
device = xxx
user = xxx
password = xxx
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
cccwantemu = 1
ccckeepalive = 1
[reader]
label = 3
protocol = cccam_mcs
device = xxx
user = xxx
password = xx
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
cccwantemu = 1
ccckeepalive = 1
[reader]
label = 4
protocol = cccam_mcs
device = xxx
user = xxx
password = xxx
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
cccwantemu = 1
ccckeepalive = 1
[reader]
label = 5
protocol = cccam_mcs
device = xxx
user = xxx
password = xx
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
cccwantemu = 1
ccckeepalive = 1
[reader]
label = 6
protocol = cccam_mcs
device = xxx
user = xx
password = xxx
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
cccwantemu = 1
ccckeepalive = 1
[reader]
label = 7
protocol = cccam_mcs
device = xxx
user = xxx
password = xxx
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
cccwantemu = 1
ccckeepalive = 1
[reader]
label = 8
protocol = cccam_mcs
device = xxx
user = xxx
password = xx
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
cccwantemu = 1
ccckeepalive = 1
Live Log
Jumping across quite few channels haven't given any live log output.
After launching the box the last one goes for:
(reader) emulator [unknown] Cannot open device: /etc/tuxbox/config/oscam_emu/SoftCam.Key
All config files are copied from master G's configs without any edits, I have just changed in oscam.conf webif an ip address to access from my pc.
All readers are set as group = 1.
While converting c lines, I missed the Emulator in oscam.server, I have just copied it from the above shared pack, but the device address is not working:
" (reader) emulator [unknown] Cannot open device: https://raw.githubusercontent.…/main/Enigma2/SoftCam.Key "
so I changed it to local SoftCam.key from the above files, but still it goes like:
"(reader) emulator [unknown] Cannot open device: /etc/tuxbox/config/oscam_emu/SoftCam.Key"
oscam.server
[reader]
label = emulator
protocol = emu
device = /etc/tuxbox/config/oscam_emu/SoftCam.Key
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
[reader] x8
label = 1
protocol = cccam_mcs
device = xxxx,xxxx
user = user
password = pass
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
cccwantemu = 1
ccckeepalive = 1
oscam.conf
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
readerrestartseconds = 1
preferlocalcards = 0
lb_mode = 2
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
cccam_cfg_reconnect_delay = 90
cccam_cfg_reconnect_attempts = 6
cccam_cfg_save = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]
[webif]
httpport = 8888
http_style = 0
http_backround_color = #38383e
http_text_color = #1e4f8a
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = xxxxxxx
http_status_log = 1
oscam.dvbapi
I: 170A:000000 ;OSN
I: 170B:000000 ;OSN
I: 1709:000000 ;OSN
I: 0690:000000 ;Orange Sk
I: 0100:003315 ;csat seca
I: 0100:003311 ;csat seca
I: 1863:003343 ;csat
I: 0500:032A00 ;Orange Polska
I: 098C:000000 ;SKY_DE
I: 0952:000000 ;Telekom Romania
I: 06F8:000000 ;D-SMART
I: 1861:000000 ;Polsat
I: 1708:000000:02C2 ;Aflam 1
I: 1708:000000:02C4 ;Aflam 2
I: 1708:000000:02C5 ;Cinema
I: 1708:000000:030C ;Hekayat Kaman HD
I: 1708:000000:02BF ;Hekayat
I: 1708:000000:02C1 ;Hekayat2
I: 1709:000000:02C2 ;Aflam 1
I: 1709:000000:02C4 ;Aflam 2
I: 1709:000000:02C5 ;Cinema
I: 1709:000000:02BF ;Hekayat
I: 1709:000000:02C1 ;Hekayat2
I: 1709:000000:030C ;Hekayat Kaman HD
I: 0500:23800,40810:4331 ;SRF 1 HD
I: 0500:23800,40810:4332 ;SRF zwei HD
I: 0500:23800,40810:4333 ;RTS Un HD
I: 0500:23800,40810:4334 ;RTS Deux HD
I: 0500:23800,40810:4335 ;Test17205
I: 0500:23800,40810:36E3 ;RSI La 1 HD
I: 0500:23800,40810:36E4 ;RSI La 2 HD
I: 0500:23800,40810:1260 ;3+ Schweiz
I: 5604:000000:0066 ;AFN|prime Atlantic
I: 5604:000000:0067 ;AFN|news
I: 5604:000000:0068 ;AFN|sports
I: 5604:000000:0069 ;AFN|prime Pacific
I: 5604:000000:006A ;AFN|spectrum
I: 5604:000000:006B ;AFN|sports 2
I: 5604:000000:006C ;AFN|family
I: 5604:000000:006D ;AFN|movie
I: 5604:000000:0192 ;AFN|Bars;Tone
I: 5604:000000:0191 ;AFN|Reaper (EPG Video)
I: 0100:003317
I: 0500:032940
I: 0500:032920
I: 0500:043330
I: 0500:040f40
I: 1863:003342
I: 06ED:000000
###Priority#####
P: 0500:030B00 ;TNTSAT
P: 0500:042820 ;Canal+ France
P: 1811:003315 ;CanalSat
P: 1811:003311 ;CanalSat
P: 0500:041950 ;FRANSAT
P: 0500:050800 ;SRG SSR
P: 0100:00006D ;TeleSat
P: 1810:000000 ;Canal+ esp
P: 09C4:000000 ;SKY_DE
P: 1708:000000 ;OSN
P: 091F:000000 ;Total Tv Serbia
P: 092F:000000 ;Telekom Romania
P: 092B:000000 ;D-SMART
P: 1802:000000 ;Nos,DIGI TV
P: 0609:000000 ;Orange Sk
P: 1815:000000 ;UPC Direct Hungary
P: 0D95:000010 ;ORF Digital
P: 0100:00006A ;Canal Digitaal NL
P: 1882:000000 ;Slovak Telecom
P: 1884:000000 ;Polsat
p: 0B01:000000 ;Polsat
P: 0100:000068 ;cyfra
P: 0100:000000 ;NC+ (Seca)
P: 0D96:000004 ;M7 Group
P: 1818:000000 ;M7 Group
P: 0100:00006C ;TV Vlaanderen
P: 4AEE:000000 ;Bulsatcom
P: 5581:000000 ;Neosat
P: 1830:000000 ;Max TV,HD+
P: 183D:000000 ;Tivusat
P: 0604:000000 ;Nova Greece
P: 0B00:000000 ;Canal Digital Nordic,DigitalALB,Antiksat,Kabelkiosk,Telekarta
P: 0963:000000 ;Sky Digital
P: 0650:000000 ;Austria plus
P: 0D96:000000 ;SKY LINK
P: 0D97:000004 ;UPC Direct Hungary
P: 1843:000000 ;HDPlus
P: 0B02:000000 ;Focus Sat Moldova 0.8w
P: 0500:050C00 ;Ntv+_(56E)
P: 0930:000000 ;Yes
P: 090D:000000 ;Yes
P: 0604:000000:02C2:0136:00CC ;ART Aflam
P: 0604:000000:02C4:0138:00CD ;ART Aflam2
P: 0604:000000:02C5:013A:009C ;ART Cinema
P: 0604:000000:030C:013B:0020 ;Hekayat Kaman HD
P: 0604:000000:02BF:0130:0020 ;ART HekayAt
P: 0604:000000:02C1:0134:0020 ;ART HekayAt2
P: 183E:000000
P: 1856:000000
P: 2600:000000 ;BISS
P: 0E00:000000 ;PowerVu
P: 1010:000000 ;TANDBERG
###ADD###
A: ::000A 2600:000000:1FFF ; ERT 1 SD
A: ::0014 2600:000000:1FFF ; ERT 2 SD
A: ::0028 2600:000000:1FFF ; ERT 1 HD
A: ::0001 2600:000000:1FFF ; ERT 2 HD
A: ::0002 2600:000000:1FFF ; ERT 3 HD
###########################################################
# BBC 27.5°W
###########################################################
# TV
A:::1044:0064::: 2600:000000:1FFF # BBC One England
A:::107C:1004::: 2600:000000:1FFF # BBC One Scottland
A:::107D:13EC::: 2600:000000:1FFF # BBC One Northern Ireland
A:::107E:0C1C::: 2600:000000:1FFF # BBC One Wales
A:::10BF:00C8::: 2600:000000:1FFF # BBC Two England
A:::10C0:012C::: 2600:000000:1FFF # BBC Three
A:::1100:01F4::: 2600:000000:1FFF # BBC News
A:::1140:0A8C::: 2600:000000:1FFF # BBC Red Button
A:::11C0:0190::: 2600:000000:1FFF # BBC Four
A:::1200:02BC::: 2600:000000:1FFF # CBBC
A:::1240:0320::: 2600:000000:1FFF # CBeebies
A:::1280:0258::: 2600:000000:1FFF # BBC Parliament
A:::12FC:0AF0::: 2600:000000:1FFF # BBC Alba
A:::1C00:0384::: 2600:000000:1FFF # (301.)
A:::1C40:0B54::: 2600:000000:1FFF # (302.)
A:::4440:17D4::: 2600:000000:1FFF # BBC Two HD
A:::4484:19C8::: 2600:000000:1FFF # BBC One HD
A:::44C8:1838::: 2600:000000:1FFF # ITV 1 Central West HD
A:::4500:189C::: 2600:000000:1FFF # Channel 4 HD
A:::45C0:1964::: 2600:000000:1FFF # STV HD
A:::4600:1B58::: 2600:000000:1FFF # BBC Three HD
A:::46C0:1BBC::: 2600:000000:1FFF # CBBC HD
A:::4E80:1A90::: 2600:000000:1FFF # UTV HD
A:::4540:1900::: 2600:000000:1FFF # Channel 5 HD
A:::4F80:1D4C::: 2600:000000:1FFF # More4 +1Thank you both I did as you wrote. With WinSCP I used and changed previous files with attached configs, converted c lines with the tool and copied the new oscam.server to directory, but all looks the same.
It connects to servers, so my assumption is those are valid and should be working, right?
Log:
Hey! I am totally new user of Zgemma H11S and received few cccam server details to connect. Searching forums and youtube I have manged myself to add them into the Oscam (transformin C lines to Readers), servers looks connected however I don't see any tv / channels. I have also added an user with the same id/pass like servers but it is not connecting and always offline.
Version: CyCeCplus-11779@57e8a3e6
S4A patch: v8.52
Compiled by: Jej@n
Compiler: armv7a-vuplus4k-linux-gnueabihf-ssl-libdvbcsa
Box type: H11.S (generic)
reader code example:
[reader]
label = 2
protocol = cccam
device = xxxxxx,1234
user = user
password = pass
inactivitytimeout = 30
fallback = 1
group = 2
cccversion = 2.3.2
ccckeepalive = 1
What I am missing or what more I need to add to use cccam? How I can search and import channels from server?
linuxsat-support.com/cms/attachment/269385/
