Hi, if it were that simple we would be very happy.. that the plugins go on any software, but maybe you don't know what things DefineOS should mean from the name you should understand OS (another system) is a proprietary software only whoever created it knows how do you install the plugins, it's practically not a Linux... that's all... the Atv or OpenPli plugins don't work.
Posts by piterfree
-
-
Hi, I didn't find it on very old 486 computer processors, it's difficult to find it... I've dismantled many computers and I still have some useful things left.
the one that is on the web that you found mounted on a 920 last Sunday for a friend and attached it with hot glue with the hot glue gun... fixed only on one side positioning it half a centimeter from the Lnb and we lowered it by 2 millimeters upper side of the blades that touched the lid and now it is perfect, it does not exceed 45 degrees.
-
hi, about that decoder... it's old and all the other software plugins don't work given what you were installing a modern panel on an old image obviously it would have crashed now you'll have to flash it again, it will be a different Python.
I don't know what you were installing, I see serviceapp...openweb...wifii...soft manager...that decoder has the memory of a child, you can't do more.
-
hi, this question is very strange...you know that Zetagemma is a mid-range decoder...especially the first ones....(without despising) and the Vu Plus was already a high-end.....the
Vu Zero RAM installed: 512 MB, Flash memory: 256 MB, RAM type: DDR3....
Zetagemma H2 751Mhz CPU, Broadcom MIPS chipset, Flash memory and DDR3 Ram
I know that the Zero is very reliable and much faster.
-
to overcome the problem if it doesn't work...and you have the ssl 100 and you want to update it and switch to the ssl 102 you just have to download from the feeds to MgCam which automatically takes your ssl to the 102 so you can get its precise oscam
OSCam-11734-799 (arm sf4008_h8.2h_h9.2h OpenSSL-1.0.2 libusb)
or
OSCam-11734-799 (arm sf4008_h8.2h_h9.2h OpenSSL-1.1.1 libusb) -
2024/04/08 11:20:00 00000000 s (main) Machine = mips
2024/04/08 11:20:00 00000000 s (main) Stb model = dm8000
2024/04/08 11:20:00 00000000 s (main) Stb vumodel = vusolo2
2024/04/08 11:20:00 00000000 s (main) Stb boxtype = vusolo2
in your log....???
in the photo there is ssl 100 Dream 920...???
there are some things that don't match
you are using the 920 oscam and Armif you are using 8000 or vusolo2 it is Mips
you have to decide what you are doing..."
-
-
menu/plugin/openweb
-
192.168.0.122:8888
192.168.0.122:8080
Pc...DCC...192.168.0.122/etc/tuxbox/config/Oscam...oscam-emu....oscam.conf.....
[webif]
httpport = 8888....8080
-
-
hi, DE works with icam streamrelay and I don't know if this software supports it... find out how and what the software needs, it should be updated.
post
SKY DE ICam - ORF - HD+ Enigma2 Settings by Lippei
-
OpenPLi 8.3 » Stable release
-
Hi, but maybe you forget how to get the most out of a good decoder... you also need plugins that help add the right codeks, try installing the Service app: player management and once you have activated the boxes and save and the decoder works restart, then check if it gave you more info.
-
Disk /dev/mtdblock4 doesn't contain a valid partition table
fdisk: can't read from /dev/mmcblk0
problemi...??
8_Fatal: Target device '/dev/mmcblk0p2' is not writable
multiboot...delete...!!
-
1* what PC do you use...??
2* the front lights up...only red LED,
3* if you are near Milan I can give you a hand....and then if you can use DCC to enter the decoder to change the boot folder...I have I did a similar thing on Mutants 51 4k, I managed to restore it with the files that I posted on a forum that I changed in the decoder and it worked restored by installing soft with USB.
-
-
-
uninstalled the driver by deleting it...after reconnecting the wifi this is the automatic recognition of Win_7,
-
2 wifii same drivers and they work perfectly.
-
driver with different kernel...I have wifii..Chinese USB and it works 100x100
