HI
I flashed to old software on my revez Q10.
Anyone got the rs232 loader for this receiver?
Joe
Posts by joe6915
-
-
I have emailed but no reply
-
I did buy from them but it is still blocked.Anyone make a backup and upload it here?
-
HI
Has anyone got the latest channel list for this receiver?
It looks like Lavatronics are blocking there update site outside the UK.
I can access the download site when using a UK proxy site but not without the proxy site.
I have download the latest software but cannot access the online update for the channel list. -
Where can you send of your receiver to get the boxkey information?
-
I will put up config later when i get home from work
-
All these users added about 6 months ago
-
all these names in for the last few months
-
HI
I have one card with about 9 users on it.
It was working fine for about 6 months but the last few days getting this error.
It can happen at any time.
Sometimes it can work for 15 minutes and sometimes only a few few minutes.Anyone help?
2012/12/20 21:33:39 A143210 c WARNING: invalid client
2012/12/20 21:33:39 A143210 c johnwork disconnected from xx.xx.xx.xx
2012/12/20 21:33:40 A15D220 c WARNING: invalid client
2012/12/20 21:33:40 A15D220 c patworker disconnected from xx.xx.xx.xx
2012/12/20 21:33:56 A144E70 c WARNING: invalid client
2012/12/20 21:33:56 A144E70 c patultimo1 disconnected from xx.xx.xx.xx
2012/12/20 21:34:03 A15B9C8 c WARNING: invalid client
2012/12/20 21:34:03 A15B9C8 c joelarchville disconnected from xx.xx.xx.xx
2012/12/20 21:34:04 A155868 c WARNING: invalid client
2012/12/20 21:34:04 A155868 c bernard disconnected from xx.xx.xx.xx
2012/12/20 21:34:07 A15A170 c WARNING: invalid client
2012/12/20 21:34:07 A15A170 c joebed disconnected from xx.xx.xx.xx
2012/12/20 21:34:08 A153618 c WARNING: invalid client
2012/12/20 21:34:08 A153618 c paul disconnected from xx.xx.xx.xx
2012/12/20 21:34:12 A164BD8 c WARNING: invalid client
2012/12/20 21:34:12 A164BD8 c pat disconnected from xx.xx.xx.xx -
I only got receiver about 1 month ago so still under guarantee.
I would have liked to fixed receiver and not send back.
I will keep you updated. -
I have tried 4 usb sticks and about 5 different images.
Time to send back.
Cost of postage from Ireland to UK is high :-( -
HI
Yes tried that.
Still the same -
HI
Yesterday updated my new Vu Ultimo with OPENVIX and all was fine.
When I turn on tonight the screen was blank so I reinstalled image and receiver was stuck on OPENVIX boot screen.
I have now tried 3 other oimages including one for the Vu website.
I have disconnected the hard drive and only have HDMI connected and still no luck.
Anyone Help?I have connected with putty with the rs232 and here is the log
Code
Display MoreBCM74130011 012 K1 K2 K3 K4 K5 Shmoo Version=3.8 DDR Freq=0x0000018C %00000002% RC1=00000001 WC1=FFFFFFEA RC2=00000019 WC2=0000003B RC3=0000000D WC3=FFFFFFEB RC4=0000000D WC4=0000003D NWC=00000014 RC5=00000001 WC5=00000014 RC6=00000019 WC6=00000014 NRC=0000000D RW=00000019 WW=00000053 RC1=00000004 WC1=FFFFFFE6 RC2=0000001B WC2=0000003C RC3=0000000F WC3=FFFFFFE6 RC4=0000000F WC4=0000003F NWC=00000012 RC5=00000004 WC5=00000012 RC6=0000001A WC6=00000012 NRC=0000000F RW=00000017 WW=0000005A G=00000000 R=0000000D W=00000014 BL=00000000 RC1=00000002 RC2=00000015 BL=00000001 RC1=00000001 RC2=00000016 BL=00000002 RC1=00000001 RC2=00000017 BL=00000003 RC1=00000001 RC2=00000016 3 COPY CODE A567 BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little Build Date: Tue Nov 29 18:41:14 2011 (doliyu@doliyu_note2) Copyright (C) Broadcom Corporation. brcm_dbox_vfd_init .. reverse_byte ..0xe0 reverse_byte ..0x7 New NAND flash at 00000000 offset 00000000 size 63872KB New NAND flash at 00000000 offset 03E60000 size 4096KB New NAND flash at 00000000 offset 04260000 size 4096KB New NAND flash at 00000000 offset 04660000 size 2048KB New NAND flash at 00000000 offset 04860000 size 1024KB New NAND flash at 00000000 offset 04960000 size 512KB New NAND flash at 00000000 offset 049E0000 size 512KB New NAND flash at 00000000 offset 04A60000 size 1024KB New NAND flash at 00000000 offset 04B60000 size 1024KB New NAND flash at 00000000 offset 04C60000 size 520192KB New NAND flash at 00000000 offset 24860000 size 4096KB DDR Freq: 396MHz CPU speed: 405MHz Memory Config: 32+16 non-UMA Device Tech: 1Gb Total memory: 384MB Boot Device: NAND Total flash: 1024MB Total memory used by CFE: 0x87000000 - 0x870646EC (411372) Initialized Data: 0x8704CAF0 - 0x8705CDD8 (66280) BSS Area: 0x8705CDD8 - 0x870646EC (30996) Local Heap: 0x87064800 - 0x87A64800 (10485760) Stack Area: 0x87A64800 - 0x87A66800 (8192) Text (code) segment: 0x87000000 - 0x870132BC (78524) CFE driver build information: LDR: ELF 1; BIN 1; SREC 1 UI: LEVEL 3; MIN 0 FS: FAT 1; FAT32 1 NET: STACK 1; ENET 1; TCP 0 USB: STACK 1; ETH 1; DISK 1; SERIAL 1; HID 1 FLASH: NAND SPLASH: 2*1024*1024; flash0.splash Initializing USB. Initialize First USB Controller USB OHCI start : Power Switching Mode Changed from 2000902 to 2000b02 USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub Try to Initialize Second USB Controller Initialize Second USB Controller USB OHCI start : Power Switching Mode Changed from 2000902 to 2000b02 USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub CFE initialized. checking usb No Usb Starting splash screen. Loader:elf Filesys:raw Dev:flash0.kernel File: Options:mem=32M mem=256M@0x20000000 rootfstype=jffs2 root=/dev/mtdblock0 rw Loading: Failed. Could not load : I/O error Log from update with usb BCM74130011 012 K1 K2 K3 K4 K5 Shmoo Version=3.8 DDR Freq=0x0000018C %00000002% RC1=00000001 WC1=FFFFFFEA RC2=00000019 WC2=00000039 RC3=0000000D WC3=FFFFFFEA RC4=0000000D WC4=0000003A NWC=00000012 RC5=00000001 WC5=00000012 RC6=00000019 WC6=00000012 NRC=0000000D RW=00000019 WW=00000051 RC1=00000004 WC1=FFFFFFE6 RC2=0000001B WC2=0000003E RC3=0000000F WC3=FFFFFFE6 RC4=0000000F WC4=00000041 NWC=00000013 RC5=00000004 WC5=00000013 RC6=0000001B WC6=00000013 NRC=0000000F RW=00000018 WW=0000005C G=00000000 R=0000000D W=00000012 BL=00000000 RC1=00000002 RC2=00000015 BL=00000001 RC1=00000001 RC2=00000016 BL=00000002 RC1=00000001 RC2=00000016 BL=00000003 RC1=00000001 RC2=00000016 3 COPY CODE A567 BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little Build Date: Tue Nov 29 18:41:14 2011 (doliyu@doliyu_note2) Copyright (C) Broadcom Corporation. brcm_dbox_vfd_init .. reverse_byte ..0xe0 reverse_byte ..0x7 New NAND flash at 00000000 offset 00000000 size 63872KB New NAND flash at 00000000 offset 03E60000 size 4096KB New NAND flash at 00000000 offset 04260000 size 4096KB New NAND flash at 00000000 offset 04660000 size 2048KB New NAND flash at 00000000 offset 04860000 size 1024KB New NAND flash at 00000000 offset 04960000 size 512KB New NAND flash at 00000000 offset 049E0000 size 512KB New NAND flash at 00000000 offset 04A60000 size 1024KB New NAND flash at 00000000 offset 04B60000 size 1024KB New NAND flash at 00000000 offset 04C60000 size 520192KB New NAND flash at 00000000 offset 24860000 size 4096KB DDR Freq: 396MHz CPU speed: 405MHz Memory Config: 32+16 non-UMA Device Tech: 1Gb Total memory: 384MB Boot Device: NAND Total flash: 1024MB Total memory used by CFE: 0x87000000 - 0x870646EC (411372) Initialized Data: 0x8704CAF0 - 0x8705CDD8 (66280) BSS Area: 0x8705CDD8 - 0x870646EC (30996) Local Heap: 0x87064800 - 0x87A64800 (10485760) Stack Area: 0x87A64800 - 0x87A66800 (8192) Text (code) segment: 0x87000000 - 0x870132BC (78524) CFE driver build information: LDR: ELF 1; BIN 1; SREC 1 UI: LEVEL 3; MIN 0 FS: FAT 1; FAT32 1 NET: STACK 1; ENET 1; TCP 0 USB: STACK 1; ETH 1; DISK 1; SERIAL 1; HID 1 FLASH: NAND SPLASH: 2*1024*1024; flash0.splash Initializing USB. Initialize First USB Controller USB OHCI start : Power Switching Mode Changed from 2000902 to 2000b02 USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub Try to Initialize Second USB Controller Initialize Second USB Controller USB OHCI start : Power Switching Mode Changed from 2000902 to 2000b02 USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub CFE initialized. USB: New device connected to bus 1 hub 1 port 1 USB: Resetting device on bus 1 port 1 USB: Locating Class 08 Vendor 0718 Product 0628: Mass-Storage Device USBMASS: Unit 0 connected checking usb Found high priority Mass Storage bus = 1, index = 0 Found file usbdisk0:/vuplus/ultimo/root_cfe_auto.jffs2Found file usbdisk0:/vuplus/ultimo/boot_cfe_auto.jffs2Found file usbdisk0:/vuplus/ultimo/splash_cfe_auto.binFound file usbdisk0:/vuplus/ultimo/kernel_cfe_auto.binwaiting for update key FrontPanel Key : d1, 80 Update splitted update from disk Reading usbdisk0:/vuplus/ultimo/cfe_cfe_auto.bin: >> load from offset = 0 Skipping...: File not found splitted update from disk Reading usbdisk0:/vuplus/ultimo/data_cfe_auto.img: >> load from offset = 0 Skipping...: File not found splitted update from disk Reading usbdisk0:/vuplus/ultimo/root_cfe_auto.jffs2: >> load from offset = 0 erase and write = 0= 0x00a00000 ================================================== ====================== flash info flash0.avail0 blk_start = 0, blk_end = 1f200000, blk_size = 20000 nand_erase_block 0xdae0000 0x20000 done nand_erase_block skipping: at blk addr = 0xdae0000 nand_erase_block 0xffa0000 0x20000 done nand_erase_block skipping: at blk addr = 0xffa0000 nand_erase_block 0x18280000 0x20000 done nand_erase_block skipping: at blk addr = 0x18280000 nand_erase_block 0x19d00000 0x20000 done nand_erase_block skipping: at blk addr = 0x19d00000 nand_erase_block 0x1ab60000 0x20000 done nand_erase_block skipping: at blk addr = 0x1ab60000 ================================================== ====================== Programming... done. 10485760 bytes written, total = a00000 load from offset = a00000 erase and write = a000001400000 Programming... done. 10485760 bytes written, total = 1400000 load from offset = 1400000 erase and write = 1400000e00000 Programming... done. 10485760 bytes written, total = 1e00000 load from offset = 1e00000 erase and write = 1e00000800000 Programming... done. 10485760 bytes written, total = 2800000 load from offset = 2800000 erase and write = 2800000200000 Programming... done. 10485760 bytes written, total = 3200000 load from offset = 3200000 erase and write = 3200000c00000 Programming... done. 10485760 bytes written, total = 3c00000 load from offset = 3c00000 erase and write = 3c00000600000 Programming... Failure during writing to nand partition, can not find good blocks in partition Failed.: Error load from offset = 4600000 erase and write = 4600000700000 Programming... Failure during writing to nand partition, can not find good blocks in partition Failed.: Error read done = 4760000 splitted update from disk Reading usbdisk0:/vuplus/ultimo/boot_cfe_auto.jffs2: >> load from offset = 0 erase and write = 0 ================================================== ====================== flash info flash0.avail0 blk_start = 1f600000, blk_end = 1fa00000, blk_size = 20000 ================================================== ====================== Programming... done. 576 bytes written, total = 240one read done = 240 splitted update from disk Reading usbdisk0:/vuplus/ultimo/splash_cfe_auto.bin: >> load from offset = 0 erase and write = 0= 0x00100000 Programming... done. 1244216 bytes written, total = 12fc38 read done = 12fc38 splitted update from disk Reading usbdisk0:/vuplus/ultimo/kernel_cfe_auto.bin: >> load from offset = 0 erase and write = 0= 0x00300000 Programming... done. 3717179 bytes written, total = 38b83b read done = 38b83b please remove usb first and reboot Log after first reboot after update. 0: 0x00000000 -> 0x00010000 0: 0x00020000 -> 0x00028000 PERCPU: Embedded 7 pages/cpu @81407000 s4384 r8192 d16096 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97024 Kernel command line: bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes Memory: 143788k/393216k available (5687k kernel code, 249428k reserved, 1214k data, 248k init, 0k highmem) Hierarchical RCU implementation. NR_IRQS:128 Detected MIPS clock frequency: 404 MHz (202.497 MHz counter) Calibrating delay loop... 403.45 BogoMIPS (lpj=201728) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 SMP: Booting CPU1... CPU revision is: 0002a044 (Brcm4380) FPU revision is: 00130001 Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes SMP: CPU1 is running Brought up 2 CPUs NET: Registered protocol family 16 PCI2.3->SDRAM window: 512 MB bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42) pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff] pci 0000:01:00.0: BAR 5: set to [mem 0x10510000-0x10510fff] (PCI address [0x10510000-0x10510fff]) pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref] Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource upg NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NTFS driver 2.1.30 [Flags: R/W]. JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 280 io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A loop: module loaded brcm-pm: enabling sata clocks PCI: Enabling device 0000:01:00.0 (0000 -> 0003) scsi0 : sata_brcmstb scsi1 : sata_brcmstb ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42 ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42 Broadcom STB NAND controller (BrcmNand Controller) bcmemac: Broadcom STB 10/100 EMAC driver v3.0 bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:00:00:00:00:00) bcmemac: not registering interface #1 at 0x10090000 (no PHY detected) usbcore: registered new interface driver zd1201 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver brcm-pm: enabling usb clocks ehci-brcm ehci-brcm.0: Broadcom STB EHCI ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300 ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci-brcm ehci-brcm.1: Broadcom STB EHCI ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500 ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-brcm ohci-brcm.0: Broadcom STB OHCI ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3 ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci-brcm ohci-brcm.1: Broadcom STB OHCI ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4 ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600 ata1: SATA link down (SStatus 4 SControl 300) hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice i2c /dev entries driver lirc_dev: IR Remote Control driver registered, major 254 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR LIRC bridge handler initialized Linux video capture interface: v2.00 Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb usbcore: registered new interface driver usbhid usbhid: USB HID core driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 lib80211: common routines for IEEE802.11 drivers EBI CS0: setting up NAND flash (primary) mtd->oobsize=0, mtd->eccOobSize=0 NAND_CS_NAND_XOR=00000001 B4: NandSelect=40000101, nandConfig=18152300, chipSelect=0 brcmnand_read_id: CS0: dev_id=ecd35195 After: NandSelect=40000101, nandConfig=18152300 Block size=00020000, erase shift=17 NAND Config: Reg=18152300, chipSize=1024 MB, blockSize=128K, erase_shift=11 busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff BrcmNAND mfg ec d3 Samsung K9F8G08U0M 1024MB on CS0 Found NAND on CS0: ACC=f7441010, cfg=18152300, flashId=ecd35195, tim1=4232222d, tim2=00000d94 BrcmNAND version = 0x0302 1024MB @00000000 B4: NandSelect=40000101, nandConfig=18152300, chipSelect=0 brcmnand_read_id: CS0: dev_id=ecd35195 After: NandSelect=40000101, nandConfig=18152300 Found NAND flash on Chip Select 0, chipSize=1024MB, usable size=1024MB, base=0 brcmnand_scan: B4 nand_select = 40000101 brcmnand_scan: After nand_select = 40000101 ACC: 16 OOB bytes per 512B ECC step; from ID probe: 16 handle_acc_control: CORR ERR threshold set to 3 bits page_shift=11, bbt_erase_shift=17, chip_shift=30, phys_erase_shift=17 Brcm NAND controller version = 3.2 NAND flash size 1024MB @00000000 ECC layout=brcmnand_oob_bch4_2k brcmnand_scan: mtd->oobsize=64 brcmnand_scan: oobavail=35, eccsize=512, writesize=2048 brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=4, eccbytes=7 -->brcmnand_default_bbt brcmnand_default_bbt: bbt_td = bbt_slc_bch4_main_descr Creating 9 MTD partitions on "brcmnand.0": 0x000000000000-0x00001f200000 : "rootfs" 0x00001f200000-0x00001f600000 : "kernel" 0x00001f600000-0x00001fa00000 : "boot" 0x00001fa00000-0x00001fc00000 : "splash" 0x00001fc00000-0x00001fd00000 : "cfe" 0x00001fd00000-0x00001fd80000 : "mac" 0x00001fd80000-0x00001fe00000 : "env" 0x00001fe00000-0x00001ff00000 : "nvm" 0x000020000000-0x00003fc00000 : "data" UBI: attaching mtd0 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 ata2: SATA link down (SStatus 4 SControl 300) UBI: max. sequence number: 0 UBI: volume 0 ("rootfs") re-sized from 569 to 3936 LEBs UBI: attached mtd0 to ubi0 UBI: MTD device name: "rootfs" UBI: MTD device size: 498 MiB UBI: number of good PEBs: 3979 UBI: number of bad PEBs: 5 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 3979 UBI: number of PEBs reserved for bad PEB handling: 39 UBI: max/mean erase counter: 1/0 UBI: image sequence number: 1714253949 UBI: background thread "ubi_bgt0d" started, PID 46 UBIFS: parse sync UBIFS: start fixing up free space UBIFS: free space fixup complete UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 498380800 bytes (486700 KiB, 475 MiB, 3925 LEBs) UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) UBIFS error (pid 1): ubifs_read_node: bad node type (255 but expected 9) UBIFS error (pid 1): ubifs_read_node: bad node at LEB 568:69432, LEB mapping status 1 UBIFS error (pid 1): ubifs_iget: failed to read inode 1, error -22 List of all partitions: 1f00 509952 mtdblock0 (driver?) 1f01 4096 mtdblock1 (driver?) 1f02 4096 mtdblock2 (driver?) 1f03 2048 mtdblock3 (driver?) 1f04 1024 mtdblock4 (driver?) 1f05 512 mtdblock5 (driver?) 1f06 512 mtdblock6 (driver?) 1f07 1024 mtdblock7 (driver?) 1f08 520192 mtdblock8 (driver?) No filesystem could mount root, tried: ubifs Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) Rebooting in 180 seconds.. -
I have the same problem here??
-
Display More
How to "Oscam check script"
As more and more peeps are required to take the plunge with oscam here is a simple script which will check to see if oscam is running. If oscam has stopped running it will restart it automatically.
#!/bin/sh
process=`ps auxwww | grep oscam | grep -v grep | awk '{print $1}'`
if [ -z '$process' ]; then
echo "Couldn't find oscam running. Restarting server-binary" >> /var/log/oscam.check
nohup /usr/local/bin/oscam >> /var/log/oscam.log &
else
echo "oscam is still OK!" >> /var/log/oscam.check
fisuccesfully tested this under a linux environment and can confirm it works 100%.You must however ensure that your oscam binary is indeed located in /usr/local/bin. If it isnt amend the script accordingly. Just configure cron to run the script say every 5 minutes & voila
new2
Very new to linux so this might be a silly question.
when i try see if oscam is running I get this (using this in terminal)
ps ax | grep cam1918 ? Ssl 0:03 /usr/local/bin/CCcam.x86
4188 ? S< 0:00 /usr/local/bin/oscam.x86
4189 ? S< 0:00 /usr/local/bin/oscam.x86
4190 ? S< 0:00 /usr/local/bin/oscam.x86
4191 ? S<l 0:15 /usr/local/bin/oscam.x86
4192 ? S<l 0:15 /usr/local/bin/oscam.x86
4196 ? S< 0:00 /usr/local/bin/oscam.x86
4197 ? S< 0:00 /usr/local/bin/oscam.x86
4198 ? S< 0:00 /usr/local/bin/oscam.x86
4199 ? S< 0:00 /usr/local/bin/oscam.x86
4200 ? S< 0:00 /usr/local/bin/oscam.x86Does this mean there is more then one oscam running?
