Posts by sunlight786

    this morning black screen on many 1841 acid Asian channels.


    Update channels

    Still no joy


    Oscam Web card status okay

    User asking reader for that pecific channel ecm okay no error on logs.



    Anyone else has similar issue in West Midlands ?


    as far as I know.


    when caid been changed to 1850

    then original box does not require card

    boxes become cardless as I got tavivo box when sly sports become dark and changed to 1850 that Tavivo does not require card to be inserted anymore and till today it running without card.


    but with todays,s update


    I tested that


    box do not work with out the card. you pulled out card then channel stop.


    so at the minut my brain stuck that this is not yet 1850.


    I have seen 1850 on oscam web page , sly sports channels asking 1850 ecm but during todays log it did not show that channels asking for new caid though.

    Oscam.config

    port = 10000@1841:000000;10001@0963:000000;10002@0960:000000



    I am confused.


    from server I got one account.


    example


    user= AA

    pass=BB


    in the necamd.list


    CWS = myip 10000 AA BB 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # caid 1841


    CWS_MULTIPUL = myip 10001 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14


    CWS_MULTIPUL = myip 10002 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14



    how do I watch 096,0960?

    which username do I use here


    remeber I got only one account

    it works


    I add all files in usr/keys


    ####################


    can you tell me can if one port can be use for 3xdiffrent caids in oscam.config [newcamd]


    basicall I want

    10000@1841,0963,0960:000000


    can it possible?


    or there will be diffrent formate?

    I am having issue with mgcamd



    running latest openAtv on zgemma h5.2tc


    install mgcamd 1.35a

    then I tried

    mgcam 1.38r1


    My channels not clearing. on VM cable or sly uk


    Here is my newcamd.list

    ##########################

    ###LINUXSAT-SUPPORT.COM###

    ##########################


    CWS_KEEPALIVE = 300

    CWS_INCOMING_PORT = 21000

    CWS = myip 19200 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan




    here is my mgcam.cfg

    ##########################

    ###LINUXSAT-SUPPORT.COM###

    ##########################


    # EMM messages

    # 00 don't show any EMMs (default)

    # 01 show only valid EMMs

    # 02 show valid and bad EMMs with complete data display

    M: { 01 }


    # ECM messages

    # 00 don't show anything about ecm

    # 01 normal mode, show pids processed, decoded ecm and cw

    # 02 verbose mode, show valid and bad ECMs with data

    C: { 02 }


    # AU

    # 00 disable, no emm pids processed

    # 01 enable, emm pids always processed for soft-au and shared cards

    # 02 auto, emm started only if channel cant be decoded

    # 03 process emm pids for network cards update only

    A: { 01 }


    # key update (sum 01 or 02 with 04)

    # 01 update only new keys, default setting

    # 02 update all keys (used for valid PMK checking)

    # 04 enable TPS au

    # + tps SID, which pmt pid contains au pid

    U: { 01 } 0x12c0


    # config files folder (softcam, autoroll, ignore/priority)

    # 00 files in /var/keys

    # 01 files in /tmp

    T: { 00 }


    # network mode, use summ for several clients

    # 00 no network (default)

    # 01 newcamd netclient

    # 02 radegast netclient

    # 04 camd3 netclient

    # 08 gbox netclient

    # 32 cccamd netclient, card list saved as /tmp/cccamd.info

    # (ECM only, supported server version up to 2.1.1, later not work)

    G: { 01 }


    # network retry, use summ for several options

    # 00 disable

    # 01 retry every new ecm

    # 02 try to connect to offline shares every Q: seconds

    # 04 try to detect and fast reconnect to lost (and not used atm) server

    # + XX messages number and YY seconds to reconnect

    # mg will reconnect to server, if no answer to last XX ecm/keepalive or

    # if no answer for last ecm or keepalive sent for YY seconds

    # set to 0 to disable

    N: { 00 } 5 30


    # network ecm timeout in seconds

    K: { 05 }


    # newcamd dead routes connect retry, sec

    Q: { 600 }


    # network shares priority

    # 00 gbox, newcamd, cccamd, radegast, camd3 (default)

    # 01 camd3, radegast, cccamd, gbox, newcamd

    # 02 cccamd, newcamd, camd3, gbox, radegast

    P: { 00 }


    # on screen display type

    # 00 No OSD (default)

    # 01 neutrino

    # 02 enigma

    # 03 relook

    # + user password for http auth

    O: { 00 } username password


    # on screen display Options, summ of:

    # 01 show emu ecm

    # 02 show network shares messages

    # 04 show decoding failed / fta

    # 08 show emm keys update

    # + web port to use for osd

    S: { 03 } 80


    # Log option, summ of:

    # 00 off

    # 01 network udp log

    # 02 log to console

    # 04 file, appended ! delete it by yourself, before it eat all your hdd

    # + IP udp-port log-file-name

    L: { 00 } 192.168.1.8 28007 /tmp/mgcamd.log


    # keep ecm cache, seconds

    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,

    # for openbox/elanvision users with remote shares make sense to set it higher than default value,

    # to not hammer cards while timeshifting or playing crypted recordings.

    E: { 15 }


    # cache option, summ of:

    # 00 Off (default)

    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list

    # 02 Ecm data cache, remember CW for (E:) time

    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart

    H: { 07 }


    # reread files, summ of:

    # 00 No (default)

    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)

    # 02 reread SoftCam.Key on channel change

    # 04 reread SoftCam.Key if file changed

    R: { 04 }


    # debug, summ of

    # 00 off (default)

    # 01 debug ecm

    # 02 debug emm

    # 04 debug network ecm

    # 08 debug network emm

    # 16 debug network login

    # 32 show mem/cpu stats every 1 min

    # 64 add timestamp to log messages

    D: { 00 }


    # box type

    # 00 autodetect, change only if you think wrong type detected.

    # 01 dbox2

    # 02 dreambox

    # 03 triple-dragon

    # 04 relook

    # 05 openbox

    # 06 dreambox/mips

    # 08 stapi/kathrein

    # 09 stapi/ipbox

    # 11 stapi/openbox

    B: { 06 }


    # map all 180x nagra caids to 1801

    # default is 01

    F: { 00 }

    Ive searched the forum up and down and cannot find a solution to my problem so will explain it below and let everyone know what I have tried to fix the issue.



    I ordered ET8500 a few days back but havent really had much of experience with it.

    I have flashed the box via USB OpenAtv latest image

    I have tried to record but after a short period of time it says that the disk is full.




    My disk is 500gb and same disk works perfect in vu duo.

    I have tried to intilise the disk but same thing happend.


    I also noticed that when I mount the disk to media/hdd and saved it

    after a while it dnt stay mounting...


    I have tried using a different HDD with the same results.
    I have flashing the box again with a new image with the same results.


    I heard this box reputition is very good but I little disappointed after struggling with this simple function.



    funny part is.


    normally you insert usb, while power off

    then

    power ON and press power botton which showing double circuler light and wait till box reboot


    this box, after pressing power botton dnt do anything


    then I insert the usb while image on and then

    press blue botton and flash as local device.


    it do successfully flashed


    please help me out with this recording issue


    I am sure some one already got the answer,how to fix it.



    anyone of you got experience to set up to veiw home cctv on their enigma 2 box?


    I have tried this guide but not success:?:


    1. first of all I found the RTSP port that my IP camera uses.

    RTSP port.jpg

    The RTSP port my camera uses is 554.

    2. test the RTSP stream. Open VLC player. Media>Open Network Stream...

    enter the line below replacing username, password, ipcameraIP and RTSP-port with your own..

    Code:

    Code
    rtsp://username:password@cameraIP:RTSP-PORT/cam/realmonitor?channel=1&subtype=1

    here is my line

    Code:

    Code
    rtsp://admin:cctvpassword@192.168.0.10:554

    now at this stage the stream work 100% on pc vlc player.


    3.NOTE: I will be adding the stream to the Favourites Bouquets, by going to /etc/enigma2. find and open the file

    Code

    Code
    userbouquet.favourites.tv

    4. Now I have added camera's RTSP stream like below to the "userbouquet.favourites.tv" file,

    This time I have to replaced colon “:” in the RTSP linkI used in VLC player with %3a

    Heres an example


    My link:

    #SERVICE 4097:0:0:0:0:0:0:0:0:0:rtsp%3a//admin%3apassword@192.168.0.10%3a554

    #DESCRIPTION Home IPCAM

    5. Reboot enigma box



    when I went to favourite box and open the channel it stay black screen


    I also forword port 554 in my router but still no joy



    can any one please help me set it up?


    i must be doing something wrong!!!

    I am using latest openAtv image

    from last 3-4 days I have noticed that their is no epg on cable channels .

    I am using epg import for epg...


    any idea or any thing new to be added?

    Hi,


    past 3 days I am having issue to download epg for my IPTV uk


    I am using epgimport with suls_iptv_iptv-bskyb.sources.xml


    for some reason it not downloading the epg now.

    it was perfect before and i was getting update daily.


    100% sure I have not alter any thing in my setting.


    any one else have issue:?::?::?::?: