Forum is been migrated to new server with new version board.
Will be quick when its back, there will still be teething problems for the first few days that will be worked through.
Forum is been migrated to new server with new version board.
Will be quick when its back, there will still be teething problems for the first few days that will be worked through.
Display MoreHello
I have a Diseqc 1.2 engine configured with USALS (coordinates are correct.), After restarting the receiver cannot transfer and find signal from one to another sattelite. I have to go to positioner setup to return to 0 and look for the signal for each satellite separately (signal goes to 80 percent).
I restarted motor dish, installed a new image, a new engine list (ciefp settings),tried tuner settings with diseqc 1.2-advanced and again nothing.
Anyone have an idea what else to try?
Seems like your dish is no longer aligned correctly made winds knocked it out.
You can try this in you usuals settings.
On the longitude value ad 0.5 degrees so if your setting is 1.5 alter it to 2.0 if that does not help alter it to 1.0 remember if you have a minus value that will be a west setting.
Minitool Partition Wizard SUCKS! My whole pc is corrupted by this program.Formatting a USB to ext4. Now I can install my pc from scratch.
User error fella or you didnt use it correctly and formatted the wrong drive.
Have it on every PC at home and work no issues.
I encountered a problem trying initializing a usb stick with this image: openpli-enigma2-7.2-dm800-gstreamer
It says, see picture.
Could be the drive has a hidden partition it does not like.
Instead of Initialising format to fat32 on a PC and then just mount the drive on the 800.
Or better still use Minitool Partition Wizard on your PC delete all partitions format fat32 or extension 4 and then just mount it.
Try this first
Press the blue button then scroll down to harddisk on the left hand panel then scroll right to initialisation and follow the on screen instructions.
Tell us if it see the HDD and if any errors are reported when you try to Initialise
Is it not seen under the Initialization option ? If it is go from there.
If not read this
Fix Hard Drive not detected in Device Manager with Telnet Commands
Why devalopers stop working on old boxes. specially Dm500S and DM800HD
The clone factories got shut down, they dont develop when they are not selling. Original boxes well times move on and Dream want to sell new model not waste time on old ones.
You can get Japher sims for these boxes and images are been developed for that sim.
Hisense TV's across the range have Sat tuners as a rule but do check the model no. A 5700 model i have will control a motor and has a cam slot..
Notepad++ v7.9.5 Enhancements & bug-fixes: 1. Fix Notepad++ not starting up due to SaveAsAdmin plugin (for installer package). 2. Fix UNC path with quotes handling in folder & file Open/Save dialog. 3. Fix file doesn't save as extension type on Windows 7. |
You don't mention if you used dreamUP or optiflasher just your trying to flash via IP that will not recover any bad sectors.
Either follow MasterG's advice or use dreamup.
Also try a small image smaller the better, that can cure this problem allowing you to then flash any image.
Does sound like because of the bad sectors the image is too big.
Try flashing with dreamup if the advice above fails with recover bad sectors selected from the options tab..
Try just a standard reflash first if it wont flash read on, no video guide.
Two guides nicked from elsewhere for the combo but same method bar files.
Also read this thread
Flashing, backup and restore settings on Zgemma H9 series
This is a basic guide to USB flash a local image zip file to the Zgemma H9 Combo.
User will require a USB stick formatted FAT32.
1) Download your chosen image.
2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.
3) Power off the Zgemma H9 Combo and connect the USB stick front USB port behind front flap.
4) Power on the Zgemma H9 Combo, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON on the remote.
5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.
6) On the next screen select 'Flash local image' and press OK on the remote.
7) On the next screen you select the USB stick where your image zip file is located.
8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.
9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot
WILL REFLASH that slot, you will loose everything you have setup in that slot. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenViX in slot 1, OpenATV 6.2 is in slot 2 and we have OpenPLi already flashed to slot 3. Select Slot 1 and press ok on the remote.
10) Once completed you can select which image you'd like to boot into and press ok on the remote.
Guide how USB flash the Zgemma H9 Combo multiboot recovery menu.
Note the recovery menu does not need to be re-flashed unless you have an issue or theres an update. Recovery zip files are released with every image build, but please note you DO NOT have to re-flash or update the recovery menu unless needed.
At the time of writing this guide re-flashing the recovery menu is not removing or affecting the installed images. Note this could change in a future update cause you to loose of the images you have installed and setup.
Zgemma H9 Combo purchased from World-of-Satellite.co.uk will have the latest Multiboot recovery menu pre-flashed at time of purchasing. The current latest revision is bootmenu r245.
1) Download latest recovery menu from OpenViX, OpenATV or wherever you wish to download from. Can be download from OpenViX downloads HERE. At time of writing this guide latest zip release is 'openvix-5.2.043.release-zgemmah9combo_recovery_emmc.zip', again you DO NOT have to re-flash or update this Multiboot recovery menu with every release.
2) Unzip the file to your desktop. You will have the following files:
'h9combo' directory
recovery_zgemmah9combo_lies.mich
recovery_zgemmah9combo_READ.me
bootargs.bin
fastboot.bin
3) Format a USB stick MAX 8GB FAT32.
4) Copy all the files and 'h9combo' folder to root of USB stick.
5) Power off the Zgemma H9 Combo.
6) Connect USB stick to front USB 2.0 port, behind front flap.
7) Press rear RESET reset button.
8) Power on whilst holding down reset button. Keep holding down the RESET button until FLSH appears on front display.
9) Be paitient, once successful the Zgemma H9 Combo will reboot into the recovery menu.
10) You'll see various options, to not go off topic simply select 'Boot 1. LINUX_1' to boot into the image installed into slot 1. Screen will look similar as below, note you can see the revision number bottom left corner.
Power down the box with the switch at the rear or at the plug.
Press and hold the power button on the remote down and at the same time turn the power back on at the switch.
This should get you into recovery mode you may have to try the above a few times.
Dear Compo i' ve also tried this one (openpli-7.2-dm800-sim e-star-ssl84-20191226)with no luck,the same issue,it keeps booting all the time,i really don't know...thank you very much,any help highly appreciated!
I would try another power supply before panicking, when the image boots so far the tuner tries to take the power it needs, if the psu is faulty it will cause it to keep boot looping.
And also make sure the tuner is push home in its slot properly
Now your sorted how you finding it mate ?
I set one on these up for my daughter seemed a good box, i didnt get chance to play about with it much though as she was in a bit of a hurry.
Ive got that image installed here with no issues.
You could try this
Portal settings are stalker type logins.
To enter the m3u line you do that under the Playlist option.
Click Edit portal and type in your line. Thats the line you have used to download the m3u file.
hi guys,i have a dm800 hd with estar sim v1,what image should i load?
thanks in advance!
Ive up loaded one here for you
Probably posted before but it has Oscam added to it.
Openpli 7.2 with Oscam for Estar sim3 image
Just scroll down to it then press menu button.