You need to be looking for one with decent memory to cope with the streams and a decent processor. I run the Xtrend ET8500 and find it excellent. If you look at the specs for that and a box similar to that should do. See hxxps://wxw.world-of-satellite.co.uk/satellite-and-terrestrial/digital-receivers/xtrend
Posts by tomthered
-
-
I did mine by manually attaching the DVB streams to each IPTV stream. This will give you an EPG for each that you have in your satellite list. I used Echannelizer and once you go in to each IPTV stream, you can right click and near the bottom click on 28.2 and then scroll down until you find your channel, it has to be exact. Once done write the list to your box and it will update and you then get 7 day EPG. Have fun lol
-
Not technical enough to answer that am afraid
-
An earlier post said it was due to an extra layer of encryption by Sly, so until that is beaten, the situation remains, its frustrating but its a time thing.
-
Can I ask does pointing the dish at 19.2 give you the same as 28.2?
-
what solution do we look for then as an alternative? Does anyone know if IPTV ran through a Vu Solo 2 would be the equivalent of using a MAG 250 box?
-
Do you know if this will work on an Nbox 5800sx which is an SH4 box?
-
Mine just shows a Sunray advert but will not allow it to open. I assume if I installed latest version via ftp, as the servers are down it will not work?
-
No idea about stability but I know Bluepassat has used it and this is courtesy of PKTeam site.
PKT SVN-3075 HYPERION v4.5 Image
SH4 Duckbox Project GIT-5767Added by PKT:
[ALL] fix cam start at startup tuner
[XPEEDLX] Add Correction time in deepstandby
[ALL] fix scrollbar
[SH4] add new WiFi Driver Manager
- restart GUI is required to detect WLAN stick on main network setup
- all drivers directly from GIT should be supported
- 'try driver' can be selected only when all driver is inactive
- eth0 is automatically up when 'disable driver' is selected
[ARIVA] fix vfd plugin
[ariva] GS fix on ledREC
[SH4] samba update and 2GB fix
[sh4] fix samba setup if IPV6 in kernel is enabled
[sh4] update rtmpdump and librtmp for IPTV Player
[sh4] eplayer image in NOR 32MB optimalization
[SH4] SyncTime - fix update script
[mips] fix tuxtxt encoding
[sh4] Removed CrossEPG from image - now only on feed
[sh4] add mount by LABEL in HDD Manager
[spark] fix multiboot
[UFS910] fix networking restart
[MIPS] fix start/stop/restart emu on standby
[MIPS] fix NetworkBrowser on sf8
[MIPS] add hbbtv indicator on Silver & Red skin
[ALL] fix detecting network interface and code optimization
[SH4] fix esi cooler standby
[MIPS] Shoutcast update
[all] add Memory Cleaner
[MIPS] fix Channel Control
[MIPS] fix GS on InpuDevice
[all] add NTFS to HDD Manager and ntfs-3g support
[MIPS] fix Start DLNA server
[MIPS] fix time correct on xpeedlx1
[MIPS] fix showing CPU clock
[ALL] add IPTV Player optimalisation
[CUBEREVO] fix BootPlus
[SH4] disable clear cache for UFS910
[MIPS] add missing renderer for better skins compatibility
[SH4] add UFS913
[ALL] fix manual backup restore
[MIPS] add mising files for LCD4Linux
[ALL] many other bugfixes not included in this changelogSpecial THX to TDT, OpenPLI, OE-alliance and all betatesters.
FTP login: root, passwd: pkteam
Regards
Pozdrawiamy Polish Koders Team -
If you want full version google is your friend
-
Here you will find HDclone free if you want a premium version you need to pay. hxxp://www.miray-software.com/products/applications/hdclone.html
-
And the reason the box is booted from a USB stick is to give it greater memory to run things as the Nand memory is very limited. They run extremely well on USB so I would take that route if you want to use this box well.
-
Translated to english
Hello everyone, I'm new to the forum. I need a help. I purchased the vu + SOLO2 and now I have installed a Black Hole 2.1.0 image, I wanted to install this: OPEN ATV 4.1 VU + only 2 backup bytytus 56
how should I do? it is enough that I put it on the stick formatted in fat 32 and follow the guide and the game is done, then installs everything automatically or I have to install other programs. and 'true that I only put the original otherwise it turns me on more' v + SOLO2, help me please let
thank you very much to all- - - Updated - - -
cantini ---- I would imagine when you insert the USB drive and flash the image it puts all the basics on according to the thread you have downloaded it from. If you need extra plugins you will need to download them from the plugins section. You could always back up your existing image and try it to see if you like it.
Immagino quando si inserisce il drive USB e Flash l'immagine mette tutte le nozioni di base sul secondo thread che hai scaricato da. Se avete bisogno di plugin aggiuntivi è necessario scaricarli dalla sezione plugins. Si può sempre eseguire il backup dell'immagine esistente e provare a vedere se ti piace.
-
cheers will try that
-
I have a Vu Solo 2 with a Vixteam backup with Apollo 8 on it. Haven't updated it as it works fine and does everything I want it to. On my Nbox I could use DreamBoxEdit to ftp in and update with Rats bouquet but am unsure how to update individual channels that seem to have changed, as the channel list is a lot different and last time I tried this I overwrote the TV guide so had to go to a backup I had. An example is on my kids list where Cartoon Network is not there. Would appreciate anyones help or guidance as I am not sure how I do this on the Solo 2. My apologies if this has already been asked.
I have seen some of the updates but am wary of changing for the sake of it as I dont know what the firmware updates bring to the table.
Thanks in advance
-
The green screen issue is because of the lack of memory when you are running from Nand. Thats why most Nbox users boot to USB because it gives more stability. If you search in this section there is a good guide to installing to USB, if I find it I will post it
EDIT here you go :_ http://linuxsat-support.com/showthread.php?t=29833
-
There you go, this is the one for Hyperion v3
-
mentos I upgraded to 7.9 and it did solve the issue. Cheers
-
swan.bag try a reflash of your image as it may be corrupted. Once it s done and the box ios loaded set yourself up with an image on USB or Hard Drive as a backup for future use. When using USN its much more stable.
-
What image is on the box and where was it from. This will show the username and password which should be root and pkteam. To amend an image on the PC open from within 7zip double click on the var/keys folder and amend your details in the Oscam.server file. Once amended save out of everything, but at this point you need to transfer the image across to burn it. However, when you view in ftp right click on the Oscam.server file, does it allow you to choose edit? If it does do that and then save.