Did you solve the problem? I also have 1 sat input, there is a signal on the TP, but no decoded channel, no picture, but it shows the signal strength ... not up to LNB, tried on another rec ... the tuner is bcm4505
Da li si rešio problem? Ja imam isto tako 1 ulaz za kabal, ima signala na TP, ali nema dekodiranog kanala, nema slike, a pokazuje jačinu signala...nije do LNB, probao na drugom rec... tuner je bcm4505
It is for zero 4k
Is there a Backup plugin working to take a copy of the image?
Have you managed to find a solution for this? Non Backup plugin or guide work...
I encountered a problem trying initializing a usb stick with this image: openpli-enigma2-7.2-dm800-gstreamer
It says, see picture.
Install mountmanager from plugin feed
Did anybody managed to start this DM800-SIM2.01-SSL84D_Backup.OpenPli.7.3_piterfree_2020 backup?
The DM800hd pvr is stuck on boot, more precisely, the boot stucks on dhcp, so it looks like it is preparing for new image flash, and it does not boot into image.
I personally managed to make similar backup like piterfree and I have same problem, nfi image backup has around 50Mb, it is flashed thru browser, of course bootloader 84d is flashed before and after, everything went without problems and on rebooting it is stuck on dhch starting point. The image is made with dflash 12.6, and sim is 2.01.
What could be the problem? How to make good working backup of OpenPli 7.3?
To be like this with more lines
Very interesanting, a lot of free line servers
Open ESI 8.6
http://www.openesi.eu/images/GigaBlue/gb800se/openesi-8.6-gb800se-20190525_usb.zip
No big issue. Image is flashed by adding folder together with this bat file on usb flash disk.
One thing more. When created (no)burn.bat file for Gigablue hd800se, there is an issue which is not big but, maybe you can edit it. Namely in burn.bat lines:
flash -noheader -forceerase usbdisk0:gigablue/7325/kernel.bin nandflash0.kernel
flash -noheader -forceerase usbdisk0:gigablue/7325/rootfs.bin nandflash0.rootfsshould be replaced by
flash -noheader -forceerase usbdisk0:gigablue/se/kernel.bin nandflash0.kernel
flash -noheader -forceerase usbdisk0:gigablue/se/rootfs.bin nandflash0.rootfsDid anybody found a way how to fix number 100 on led display?
I am not sure. All files are here in zip, and you must put 755 on all files
Oh finally, I used the official OpenPli plugin from feeds which did not worked in past. This time it is probably combined with Version 11.6 for OpenPli 3.0 15-01-2013 Pedro_Newbie (Extensions for Gigablue by SCP) so it worked for me.
Code mentioned above did not solve the issue
Thank you very much!! I can attach the picture but this time, that would be a picture of successful backup :D
Hi, the version I use is Version 11.6 for OpenPli 3.0 15-01-2013 Pedro_Newbie (Extensions for Gigablue by SCP) (shown on picture). It is the only one which can be used on my Gigablue so it is very specific, it can be found on https://master.dl.sourceforge.…a.it_mips32el.ipk?viasf=1 .
I used it on e.g. ATV 6.4, TeamBlue and on some older image OpenRSI, where it worked.
This time it is OpenPli 7.3 from GigaBlue 800se : OpenPLi 7.3Star 20201206 1.17.0.1 where there miss some files to the plugin (files like nanddump but I used the ones from OpenATV). Kernel is 3.9.6. and then i came to this problem.
Hello everybody. I am having a problem with this plugin on Gigablue hd800se when trying to make a backup of OpenPli 7.3.
Namely, this pluging worked with some Gigablue fix, but then when I tried to use it on this version it cannot make backup. It shows an error saying "/usr/bin/backupsuite.sh: line 1: syntax error: unterminated quoted string" during creation of kerneldump. Is there any solution?
Great, I managed it after several years!!
So, the steps are something like:
root@gb800se:~# opkg update
root@gb800se:~# opkg install firmware-rt2870
root@gb800se:~# opkg install enigma2-plugin-systemplugins-wirelesslan
root@gb800se:~# reboot
root@gb800se:~# opkg update
root@gb800se:~# opkg install kernel-module-rt2800usb
root@gb800se:~# rebootProbably on this link we can find also what we need http://www.ourdreambox.com/ubb…at&Number=20659#Post20409 .
Thank you so much
USB\VID_148F&PID_5370&REV_0101 i.e. USB\VID_148F&PID_5370, but I do not have it on my openpli plugin/drivers feed.
Thank you. The thing that is ocupying my mind, is how to install wifi driver, there is no wifi driver in Download plugins section. I only have DVB drivers, and not wifi drivers, is there an option to solve this?
How important is it that enigma2 has the latest kernel, gstreamer, drivers and python? Which of these should always be the latest that exists? I want to start e2 on the old device and when I put the latest image (ATV for example) it works abnormally slow. Should we pay attention to all this and what is most important for C$S% on e2?
Automatic Fullbackup try this
Try this https://master.dl.sourceforge.…a.it_mips32el.ipk?viasf=1 or find some on this link https://sourceforge.net/projec…files/PLUGIN/backupsuite/
