Hi Lads
I have this image running on my Wetek Play 2 and all going well enough. I have a couple of issues if someone come lend some advice.
1. I installed Tsmedia 11.6 but everytime I try to run it it crashes. Any idea what the issue might be?
2. Is it possible at all to switch from enigma2 to the android system while running enigma2 from my sdcard? I can do it by taking out the Sdcard and rebooting but this is a pain to be honest.
Any help would be much appreciated.
Thanks
Bean
Display MoreInternal wifi work for me.
When trying scan wireless networks with Network setup menu not work for me.
1)Go to Network setup Menu >>>> Adapter settings menu.
2)Use interface : Yes
3)Use DHCP : Yes
4)Insert your Network name (SSID).
5)Select Encryption .
6)Insert Encryption Key.
7)Press green button.
8)Wifi work for me
Sorry for my bad English.
This method worked for me. Found nothing when scanning so manually put everything in.
Display MoreFrom pcz
Hi Guys.
Here you are a new version from my keymap for Openelec remote:
It have color button fixes. Now i made a package, so it is easy to install, and just need to select the keymap_OE_pcz from list. It have CEC fixes in as well.
Hi Mach1
Is there a NAND version of this?
Hi Lads
Is there a nand version?
Hi Mach1
Great work. Have one small issue at the moment. I am using openelec rc and blue button for favourites won't work. I have selected the openelec rc in settings and ELEC in keymap.
Is there a way to fix this?
Thanks
Bean
Managed to sort this out with a little help from Wetek. It turns out that the security sim within the box comes loose during shipping even though they hot glue it in place. When this sim is not in correctly it causes a boot loop. The following tutorial will help anyone with the same issue - [Tutorial] How to check your security SIM on WeTek.OpenELEC - WeTek Forums
Hope this helps someone.
Installed latest version of android and it still spins.
Thanks for that.
I have ran this procedure to install Openelec on nand by following the detailed instructions.
All goes well and the latest version 6.0.3 installs with no issues. It then tries to reboot.
It first displays the white Wetek.Play screen and then the black screen with the Wetek and Openelec logos and then goes around in circles.
Any ideas?
Hi
My Wetek Openelec (Orange LED) won't boot. It just goes around in circles. Is there a tutorial available on how to write a new or updated Openelec image to this box?
Thanks
Bean
How would you record a video? Looking to make a small video tutorial using different menus and screens etc.
I have installed the metalkettle repository and installed xmovies8
I keep getting xmovies8 error - check log
Any ideas how I could fix this?
Yeah use Mnigma instead. Much better and stable than pli image.
The openpli image lets me use the colour buttons on my openelec remote. Tried mnigma and it doesn't.
Is the a version of mnigma that will allow me use the colour buttons or is there a way to edit the remote settings?
I have installed this image on my Wetek. Trying to install some plugins but won't install anything for me e.g. Autobouquets and Crossepg
Anyone know how to fix this?
Here are my configs -
oscam.conf
[global]
logfile = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/oscam.log
nice = -1
usrfile = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/oscamuser.log
cwlogdir = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/cw
[cache]
[newcamd]
port = 10001@0963:000000
serverip = 127.0.0.1
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[dvbapi]
au = 1
enabled = 1
pmt_mode = 4
user = Openelec dvdapi
boxtype = pc
[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15
[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 15
oscam.server
[reader]
label = Cccamtest
description = cccam
enable = 0
protocol = cccam
device = xxxxxxxxx.dyndns.org,xxxxx
user = cline username
password = cline password
inactivitytimeout = 30
caid = 0963
ident = 0963:000000
group = 3
cccversion = 2.0.11
cccwantemu = 1
ccckeepalive = 1
[reader]
label = newcamdtest
enable = 0
protocol = newcamd
device = xxxxxxxxx.dyndns.org,xxxxx
user = cline username
password = cline password
disableserverfilter = 1
connectoninit = 1
caid = 0963
ident = 0963:000000
group = 2
ccchop = 3
[reader]
label = slyuk
enable = 0
protocol = pcsc
device = 0
caid = 0963
detect = cd
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
oscam.user
[account]
user = Openelec dvdapi
pwd = 123456
caid = 0963
au = 1
group = 1,2,3
ident = 0963:000000
[account]
user = Openelec dvdapi(Tvheadend)
pwd = 123456
caid = 0963
au = 1
group = 1,2,3
ident = 0963:000000
Should there be an IP address for Openelec dvdapi in oscam as per image attached?
This is my tvheadend ca config -
This is currently what live log is outputting -
2016/02/25 19:40:45 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r0 (armv7a-openelec-linux-gnueabi)
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 0960 ECM_PID: 0500 PROVID: 000000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 0961 ECM_PID: 0500 PROVID: 000000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0963 ECM_PID: 0500 PROVID: 000000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 found 3 ECMpids and 0 STREAMpids in PMT
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 receiver wants to demux srvid 0585 on adapter 0001 camask 0002 index 0000 pmtpid 0000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 new program number: 0585 (0960:0585 unknown) [pmt_list_management 3]
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 continue decoding of SRVID 0585
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 skipped stream CAID: 0960 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 0)
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 skipped stream CAID: 0961 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 1)
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 skipped stream CAID: 0963 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 2)
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 found 3 ECMpids and 0 STREAMpids in PMT
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 receiver wants to demux srvid 0585 on adapter 0001 camask 0002 index 0000 pmtpid 0000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 new program number: 0585 (0960:0585 unknown) [pmt_list_management 3]
2016/02/25 19:40:51 1994A38 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/02/25 19:40:57 1994A38 c (-) -- Skipped 1 duplicated log lines --
2016/02/25 19:41:59 1994A38 c (-) -- Skipped 21 duplicated log lines --
- - - Updated - - -
Anybody willing to help???
- - - Updated - - -
As far as I can see the problem is with the user not connected -
Any chance you could give me the link?
- - - Updated - - -
This is the one I downloaded - http://linuxsat-support.com/showthread.php?t=101362
Went into the oscam config files and copied everything over and restarted oscam.
Now I have 2 root servers and anonymous user.
Any ideas?
Got oscam going, was restarting using the webif which does not work. had to reboot the box itself.
Oscam running now and client openelec dvdapi but still no channels clearing.
- - - Updated - - -
Got oscam going, was restarting using the webif which does not work. had to reboot the box itself.
Oscam running now and client openelec dvdapi but still no channels clearing.
- - - Updated - - -
This is what I am getting now -
(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
Hi Lads,
I bought a Wetek Openelec (Orange Light) box, not the play version. The problem I am having is getting my cline to work on the box.
I have read countless threads on different forums and tried dozens of configs but no good. I have Tvheadend working fine and can watch FTA channels no bother and also have oscam installed and up and running.
Can anybody please give me working oscam config files so I can enter my cline and get channels clearing. This is driving me nuts!!!!!
Thanks in advance lads.
Bean
Sorry now new to Wetek's. If I put this backup into /storage/backup/ can I restore it from there or does it have to be sd card?
Can I use a USB stick?
Hi Lads,
I am thinking of buying one of these for myself. I have some questions.
Can I use this box for my ***uk channels?
Can they run CCcam etc.?
What images are available for them if any?
Any information would be greatly appreciated.
Thanks
Bean
Is there some kind of protocol that the boxes can't work with?
Everything in the house and office can connect except these boxes.
- - - Updated - - -
Figured it out. I tried another skybox F5s I have there and it works fine. Must be something to do with the commando 15.1 image on the DM500s.
Has anyone else encountered this and is there a fix for it?
Is there a better commando image I could use?
I have a DM500s, a Vu+ Duo and a DM800HD Se. Have tried all 3 and no joy.
I have a second satellite broadband line coming into the house which connects to the boxes no problem. At the time when we had standard broadband I got a separate satellite line in cos the boxes kept glitching especially in the evenings.
The F2000 is in PPPoE mode would this have anything to do with the boxes not connecting?
