Posts by esuo2
-
-
I will try PLI today and let you know buddy!
-
followed the steps to the latter, but it still didn't work for me
-
Good morning bud, were you able to look into and found a solution to plugin not working with ATV?
Regards.
-
Display More
usb stick is from realtek
try this over telnet:
opkg list | grep 8192
then you will see, what you can install, hope will work
Code
Display Moreroot@vuzero4k:~# opkg list | grep 8192 enigma2-plugin-drivers-network-usb-rtl8192eu - 1.0-r0 firmware-rtl8192cu - 1.1+git296+4b2b151-r0 - firmware-rtl8192cu version 1.1+gitAUTOINC+4b2b151e18-r0 firmware-rtl8192eu - 1.1+git296+4b2b151-r0 - firmware-rtl8192eu version 1.1+gitAUTOINC+4b2b151e18-r0 kernel-module-8192eu - 1.0-r0 - Driver for Realtek USB wireless device 8192eu kernel-module-8192eu-4.1.20-1.9 - 1.0-r0 - 8192eu kernel module kernel-module-8192eu-dbg - 1.0-r0 - Driver for Realtek USB wireless device 8192eu - Debugging files kernel-module-8192eu-dev - 1.0-r0 - Driver for Realtek USB wireless device 8192eu - Development files kernel-module-rtl8192c-common-4.1.20-1.9 - 4.1.20-r0.1.3 - rtl8192c-common kernel module kernel-module-rtl8192ce-4.1.20-1.9 - 4.1.20-r0.1.3 - rtl8192ce kernel module kernel-module-rtl8192cu-4.1.20-1.9 - 4.1.20-r0.1.3 - rtl8192cu kernel module -
Code
root@vuzero4k:~# lsusb Bus 001 Device 002: ID 0bda:8178 Bus 002 Device 002: ID 067b:2571 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0002 Bus 003 Device 001: ID 1d6b:0001 Bus 004 Device 001: ID 1d6b:0001 -
Code
root@vuzero4k:~# opkg install rtl8812au * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'rtl8812au'. -
But it seems to be loading, your problem is that you don't see the wifi AP ? Do you see others or none at all ?
none at all
-
Display More
please try this file in Attachment
copy the .ipk file via FTP (DCC_E2 or FileZilla) to the box in the /tmp folder
Connect to the box via telnet and enter the following command:
opkg install /tmp/*.ipk
reboot
Coderoot@vuzero4k:~# opkg install --force-reinstall /tmp/*.ipk Installing firmware-rtl8192eu (1.1+git296+4b2b151) on root Downloading http://openpli8xstar.japhar.net/feeds/openpli-8xstar/all/firmware-rtl8192eu_1.1+git296+4b2b151-r0_all.ipk. Installing enigma2-plugin-drivers-network-usb-rtl8192eu (1.0) on root Configuring firmware-rtl8192eu. Configuring enigma2-plugin-drivers-network-usb-rtl8192eu. root@vuzero4k:~# rebootunfortunately, the WIFI network is still not detected.
-
1. enigma2-plugin-systemplugins-wirelesslan was already installed, so there was an upgrade
Coderoot@vuzero4k:~# opkg list-installed | grep kernel-module-aes-generic root@vuzero4k:~# opkg list-installed | grep kernel-module-arc4nothing comes out.......no wireless network detected.
Regards.
-
Display More
On DM800HDse...
opkg update
opkg install kernel-module-rtl8192cu
opkg install enigma2-plugin-systemplugins-wirelesslan
WPA/WPA2
opkg install kernel-module-aes-generic-3.2-dm800se
opkg install kernel-module-arc4-3.2-dm800se
everything I try it says No packages installed or removed
Maybe I will need all .ipks for VU+ zero4k
-
You need to install other packages as well, the wirelesslan, the various libraries to support encryption, etc...
Are you able to see "open/not encrypted" Wifi ?
TS
No, I am not able...
-
successfully installed the driver, but unfortunately, it did not recognise any WIFI network
Coderoot@vuzero4k:~# opkg list-installed | grep rtl8192cu firmware-rtl8192cu - 1.1+git296+4b2b151-r0 kernel-module-rtl8192cu-4.1.20-1.9 - 4.1.20-r0.1.3 -
hi mate, couldn't get the original VU+ wireless 2.0 Adapter to work
root@vuzero4k:~# opkg update && opkg install rtl8192cu
Couldn't find anything to satisfy 'rtl8192cu'
[tt]
Coderoot@vuzero4k:~# opkg install kernel-module-rtl8192cu No packages installed or removed. root@vuzero4k:~# opkg install firmware-rtl8192cu No packages installed or removed.Code
Display Moreroot@vuzero4k:~# lsusb Bus 001 Device 002: ID 0bda:8178 Bus 002 Device 002: ID 067b:2571 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0002 Bus 003 Device 001: ID 1d6b:0001 Bus 004 Device 001: ID 1d6b:0001 root@vuzero4k:~# dmesg | tail [ 1999.488023] rtl8192cu: Chip version 0x11 [ 1999.569322] rtl8192cu: MAC address: e8:4e:06:4f:0b:a4 [ 1999.574417] rtl8192cu: Board Type 0 [ 1999.578187] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 1999.584064] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 1999.590960] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 1999.591645] usbcore: registered new interface driver rtl8192cu [ 1999.598447] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw_TMSC.bin failed with error -2 [ 1999.608810] rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin [ 1999.860660] bcmgenet f0480000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/txCode
Display Moreroot@vuzero4k:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:1D:EC:14:9C:49 inet addr:192.168.8.198 Bcast:192.168.8.255 Mask:255.255.255.0 inet6 addr: fe80::21d:ecff:fe14:9c49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2164 errors:0 dropped:10 overruns:0 frame:0 TX packets:4768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:354914 (346.5 KiB) TX bytes:6188179 (5.9 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:54 errors:0 dropped:0 overruns:0 frame:0 TX packets:54 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6816 (6.6 KiB) TX bytes:6816 (6.6 KiB) wlan0 Link encap:Ethernet HWaddr E8:4E:06:4F:0B:A4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)Coderoot@vuzero4k:~# iwlist wlan0 scanning wlan0 No scan resultsdon't know if you can help
Regards.
-
ok, that will be tomorrow, I will do that and get back
-
after reboot
Code
Display Moreroot@vuzero4k:~# wireguard start Starting all configured Wireguard interfaces [#] echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6 [#] /etc/wireguard/cloudflare.sh up cloudflare [#] ip link add cloudflare type wireguard [#] wg setconf cloudflare /dev/fd/63 [#] ip -4 address add 172.16.0.2/32 dev cloudflare [#] ip link set mtu 1420 up dev cloudflare RTNETLINK answers: Address already in use [#] ip link delete dev cloudflare root@vuzero4k:~# -
I was using the Cloudflare DNS in my router, I forgot to remove it
Code
Display Moreroot@vuzero4k:~# ping engage.cloudflareclient.com PING engage.cloudflareclient.com (162.159.192.1): 56 data bytes 64 bytes from 162.159.192.1: seq=1 ttl=50 time=136.103 ms 64 bytes from 162.159.192.1: seq=2 ttl=50 time=157.952 ms 64 bytes from 162.159.192.1: seq=3 ttl=50 time=173.302 ms 64 bytes from 162.159.192.1: seq=4 ttl=50 time=158.044 ms 64 bytes from 162.159.192.1: seq=5 ttl=50 time=160.529 ms 64 bytes from 162.159.192.1: seq=6 ttl=50 time=157.417 ms 64 bytes from 162.159.192.1: seq=7 ttl=50 time=157.253 ms 64 bytes from 162.159.192.1: seq=8 ttl=50 time=154.092 ms 64 bytes from 162.159.192.1: seq=9 ttl=50 time=156.980 ms 64 bytes from 162.159.192.1: seq=10 ttl=50 time=164.916 ms 64 bytes from 162.159.192.1: seq=11 ttl=50 time=155.034 ms -
bad address 'engage.cloudflareclient.com'
Where you from ?
Show the output in the console
Codeping engage.cloudflareclient.com??
QuoteDisplay Moreroot@vuzero4k:~# /etc/init.d/wireguard.sh start
Starting all configured Wireguard interfaces
[#] echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6
[#] /etc/wireguard/cloudflare.sh up cloudflare
[#] ip link add cloudflare type wireguard
[#] wg setconf cloudflare /dev/fd/63
[#] ip -4 address add 172.16.0.2/32 dev cloudflare
[#] ip link set mtu 1420 up dev cloudflare
RTNETLINK answers: Address already in use
[#] ip link delete dev cloudflare
-
image openATV 7.4 -devel
etc/wireguard >> cloudflare.conf
Code
Display More[Interface] Address = 172.16.0.2/32 DNS = 1.1.1.1, 8.8.8.8, 9.9.9.9 MTU = 1420 PreUp = echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6 PreUp = /etc/wireguard/%i.sh up %i PostUp = wg set %i private-key /etc/wireguard/%i.key PostUp = resolvconf -u; resolvconf -l %i PostUp = ping -4c1 -t500 -I %i engage.%iclient.com PostDown = /etc/wireguard/%i.sh down %i PostDown = echo 0 > /proc/sys/net/ipv6/conf/all/disable_ipv6 [Peer] PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo= AllowedIps = 0.0.0.0/1, 128.0.0.0/1 Endpoint = engage.cloudflareclient.com:2408 #PersistentKeepalive = 25root@vuzero4k:~# /etc/init.d/wireguard.sh start
Code
Display MoreStarting all configured Wireguard interfaces [#] echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6 [#] /etc/wireguard/cloudflare.sh up cloudflare ping: bad address 'engage.cloudflareclient.com' Usage: ip route { list | flush } SELECTOR ip route save SELECTOR ip route restore ip route showdump ip route get [ ROUTE_GET_FLAGS ] ADDRESS [ from ADDRESS iif STRING ] [ oif STRING ] [ tos TOS ] [ mark NUMBER ] [ vrf NAME ] [ uid NUMBER ] [ ipproto PROTOCOL ] [ sport NUMBER ] [ dport NUMBER ] ip route { add | del | change | append | replace } ROUTE SELECTOR := [ root PREFIX ] [ match PREFIX ] [ exact PREFIX ] [ table TABLE_ID ] [ vrf NAME ] [ proto RTPROTO ] [ type TYPE ] [ scope SCOPE ] ROUTE := NODE_SPEC [ INFO_SPEC ] NODE_SPEC := [ TYPE ] PREFIX [ tos TOS ] [ table TABLE_ID ] [ proto RTPROTO ] [ scope SCOPE ] [ metric METRIC ] [ ttl-propagate { enabled | disabled } ] INFO_SPEC := { NH | nhid ID } OPTIONS FLAGS [ nexthop NH ]... NH := [ encap ENCAPTYPE ENCAPHDR ] [ via [ FAMILY ] ADDRESS ] [ dev STRING ] [ weight NUMBER ] NHFLAGS FAMILY := [ inet | inet6 | mpls | bridge | link ] OPTIONS := FLAGS [ mtu NUMBER ] [ advmss NUMBER ] [ as [ to ] ADDRESS ] [ rtt TIME ] [ rttvar TIME ] [ reordering NUMBER ] [ window NUMBER ] [ cwnd NUMBER ] [ initcwnd NUMBER ] [ ssthresh NUMBER ] [ realms REALM ] [ src ADDRESS ] [ rto_min TIME ] [ hoplimit NUMBER ] [ initrwnd NUMBER ] [ features FEATURES ] [ quickack BOOL ] [ congctl NAME ] [ pref PREF ] [ expires TIME ] [ fastopen_no_cookie BOOL ] TYPE := { unicast | local | broadcast | multicast | throw | unreachable | prohibit | blackhole | nat } TABLE_ID := [ local | main | default | all | NUMBER ] SCOPE := [ host | link | global | NUMBER ] NHFLAGS := [ onlink | pervasive ] RTPROTO := [ kernel | boot | static | NUMBER ] PREF := [ low | medium | high ] TIME := NUMBER[s|ms] BOOL := [1|0] FEATURES := ecn ENCAPTYPE := [ mpls | ip | ip6 | seg6 | seg6local | rpl | ioam6 | xfrm ] ENCAPHDR := [ MPLSLABEL | SEG6HDR | SEG6LOCAL | IOAM6HDR | XFRMINFO ] SEG6HDR := [ mode SEGMODE ] segs ADDR1,ADDRi,ADDRn [hmac HMACKEYID] [cleanup] SEGMODE := [ encap | encap.red | inline | l2encap | l2encap.red ] SEG6LOCAL := action ACTION [ OPTIONS ] [ count ] ACTION := { End | End.X | End.T | End.DX2 | End.DX6 | End.DX4 | End.DT6 | End.DT4 | End.DT46 | End.B6 | End.B6.Encaps | End.BM | End.S | End.AS | End.AM | End.BPF } OPTIONS := OPTION [ OPTIONS ] OPTION := { flavors FLAVORS | srh SEG6HDR | nh4 ADDR | nh6 ADDR | iif DEV | oif DEV | table TABLEID | vrftable TABLEID | endpoint PROGNAME } FLAVORS := { FLAVOR[,FLAVOR] } FLAVOR := { psp | usp | usd | next-csid } IOAM6HDR := trace prealloc type IOAM6_TRACE_TYPE ns IOAM6_NAMESPACE size IOAM6_TRACE_SIZE XFRMINFO := if_id IF_ID [ link_dev LINK ] ROUTE_GET_FLAGS := [ fibmatch ] Usage: ip route { list | flush } SELECTOR ip route save SELECTOR ip route restore ip route showdump ip route get [ ROUTE_GET_FLAGS ] ADDRESS [ from ADDRESS iif STRING ] [ oif STRING ] [ tos TOS ] [ mark NUMBER ] [ vrf NAME ] [ uid NUMBER ] [ ipproto PROTOCOL ] [ sport NUMBER ] [ dport NUMBER ] ip route { add | del | change | append | replace } ROUTE SELECTOR := [ root PREFIX ] [ match PREFIX ] [ exact PREFIX ] [ table TABLE_ID ] [ vrf NAME ] [ proto RTPROTO ] [ type TYPE ] [ scope SCOPE ] ROUTE := NODE_SPEC [ INFO_SPEC ] NODE_SPEC := [ TYPE ] PREFIX [ tos TOS ] [ table TABLE_ID ] [ proto RTPROTO ] [ scope SCOPE ] [ metric METRIC ] [ ttl-propagate { enabled | disabled } ] INFO_SPEC := { NH | nhid ID } OPTIONS FLAGS [ nexthop NH ]... NH := [ encap ENCAPTYPE ENCAPHDR ] [ via [ FAMILY ] ADDRESS ] [ dev STRING ] [ weight NUMBER ] NHFLAGS FAMILY := [ inet | inet6 | mpls | bridge | link ] OPTIONS := FLAGS [ mtu NUMBER ] [ advmss NUMBER ] [ as [ to ] ADDRESS ] [ rtt TIME ] [ rttvar TIME ] [ reordering NUMBER ] [ window NUMBER ] [ cwnd NUMBER ] [ initcwnd NUMBER ] [ ssthresh NUMBER ] [ realms REALM ] [ src ADDRESS ] [ rto_min TIME ] [ hoplimit NUMBER ] [ initrwnd NUMBER ] [ features FEATURES ] [ quickack BOOL ] [ congctl NAME ] [ pref PREF ] [ expires TIME ] [ fastopen_no_cookie BOOL ] TYPE := { unicast | local | broadcast | multicast | throw | unreachable | prohibit | blackhole | nat } TABLE_ID := [ local | main | default | all | NUMBER ] SCOPE := [ host | link | global | NUMBER ] NHFLAGS := [ onlink | pervasive ] RTPROTO := [ kernel | boot | static | NUMBER ] PREF := [ low | medium | high ] TIME := NUMBER[s|ms] BOOL := [1|0] FEATURES := ecn ENCAPTYPE := [ mpls | ip | ip6 | seg6 | seg6local | rpl | ioam6 | xfrm ] ENCAPHDR := [ MPLSLABEL | SEG6HDR | SEG6LOCAL | IOAM6HDR | XFRMINFO ] SEG6HDR := [ mode SEGMODE ] segs ADDR1,ADDRi,ADDRn [hmac HMACKEYID] [cleanup] SEGMODE := [ encap | encap.red | inline | l2encap | l2encap.red ] SEG6LOCAL := action ACTION [ OPTIONS ] [ count ] ACTION := { End | End.X | End.T | End.DX2 | End.DX6 | End.DX4 | End.DT6 | End.DT4 | End.DT46 | End.B6 | End.B6.Encaps | End.BM | End.S | End.AS | End.AM | End.BPF } OPTIONS := OPTION [ OPTIONS ] OPTION := { flavors FLAVORS | srh SEG6HDR | nh4 ADDR | nh6 ADDR | iif DEV | oif DEV | table TABLEID | vrftable TABLEID | endpoint PROGNAME } FLAVORS := { FLAVOR[,FLAVOR] } FLAVOR := { psp | usp | usd | next-csid } IOAM6HDR := trace prealloc type IOAM6_TRACE_TYPE ns IOAM6_NAMESPACE size IOAM6_TRACE_SIZE XFRMINFO := if_id IF_ID [ link_dev LINK ] ROUTE_GET_FLAGS := [ fibmatch ] Unable to access interface: No such device [#] ip link delete dev cloudflare Cannot find device "cloudflare"root@vuzero4k:~# curl -4 ip-api.com
Code
Display More{ "status" : "success", "continent" : "Mars", "continentCode": "AF", "country" : "sweetness", "countryCode" : "SH", "region" : "AA", "regionName" : "Sweetness Region", "city" : "Sweet City", "district" : "", "zip" : "", "lat" : xxxxxx, "lon" : xxxxx, "timezone" : "Africa/Sweet", "offset" : 0, "currency" : "USD", "isp" : "xxxxx Ltd.", "org" : "xxxxxx Limited", "as" : "AS30986 xxxxx Limited", "asname" : "xxxxx", "mobile" : true, "proxy" : false, "hosting" : false, "query" : "xx.xx.6x.40" }root@vuzero4k:~# wg-quick up wg0
Codewg-quick: `/etc/wireguard/wg0.conf' does not exist -
How do I activate log to /etc/wireguard?
