try to install libraries:
opkg install libssl0.9.8
opkg install libssl1.0
or with apt-get install ....
apt-get install libusb-1.0-0-dev
apt-get install libusb-1.0-0
I don't have your box and I don't remember what command it wants
try to install libraries:
opkg install libssl0.9.8
opkg install libssl1.0
or with apt-get install ....
apt-get install libusb-1.0-0-dev
apt-get install libusb-1.0-0
I don't have your box and I don't remember what command it wants
it seems that oscam is not installed
Have you installed the necessary libraries? launch oscam from telnet with the command "oscam &" without " and see what it responds. the binary should be placed in /usr/bin. It doesn't seem to me that dreamelite has a different path.
I have dreambox 920 and dreambox 900 , with DreamElite 7.1.
I use allways oscam-emu by audi06_19 and working perfect until version 11752 .
From 11753 until 11758 do not work in DreamElite 7.1.
Can anyone help ??
thanks
hi, try doing this: install the latest working version and then replace the binary with the new one, being careful to rename the file exactly like the old one. Always check that the attributes are 755. So we can see if it is the installation package or the lack of some libraries necessary to start the new versions
hi gobi2000 ,
the work is excellent! The only thing I observe is the time it takes to exit the prompt after the update. If launched from the box the window does not close. From telnet/ssh the command remains active but does not close:
root@zgemmah2h:~# cd /usr/script
root@zgemmah2h:/usr/script# sh tivusat.sh
EMM spelled correctly!
need to type: ctrl+c
now it's OK
the data you write is entered correctly user/pass/port
the binary returns compilation errors which I attach.
I changed the file name for convenience
I have 183E gold card of Tivusat
Is the OSCAM launched correctly? can you open the webif? If ncam reads the same, oscam must do the same, there is no doubt.
Post your configuration here and let's see if there are any imperfections in the compilation. Have you entered the RSAKEY correctly? Have you chosen the correct device?
HI,
It happened to me too, sometimes the decoder needs to be restarted to make sure the oscam works again.
this is what piterfree wrote in a color that is not readable
the url needs a new HW_emm
the EMM it's the same of mine.
unlike usual, tonight he didn't write and in the log I can't find any strings that refer to the contact at the pastebin
I'll try as soon as possible, tnx
Hi, motelodico72
I use: emmcache = 1,1,2,0 like suggested in samur config
Take a look at you're .log file (use debug level 64) and see what's going on..
I use degug level 64.
Dont write anything
hi samur,
for me no problems installing and viewing the box from openwebif. The only problem is the failure to update the EMM from https automatically, which never happened before the binary change with 11734.
By sending the contents of the "raw" manually, the card receives and writes the EMM. Any guesses?
device = tvmediasat.mooo.com 19600
device = tvmediasat.mooo.com[comma] 19600
device = tvmediasat.mooo.com,19600
??? I dont understand
device=host,port
you have to write the device like this
2023/04/03 13:08:50 3FAD3A3D p (cccam) xxxxxx configuration error!
an error is surely in the CCcam reader.
the other could be determined by the card device. It is currently set to "dev/sci0" but may need to be set to "dev/sci1"
Display More[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
user =
dvbapiaudreamosatread_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
Display More[webif]
httpport = 8888
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed =
127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255127.0.0.1,192.168..0-192.168.255.255http_status_log = 1
look to oscam.dvbapi if there are sono permission denied