I have a MECOOL KIII Pro which is becoming very unreliable, but can't find anyone that knows much about them. I'm not sure if it's the fault of the firmware, or if there is a newer version available which I could try.
If I can't find anything newer, I'm thinking of replacing it.
Can anyone suggest a cheapish alternative?
Hello everyone, ihave mecool kiii pro, i want to install enigma2 is there any simple way to installed? because i have no idea how to do that.
Thanks
It's difficult to find out if there is any interest in KIII Pro these days. I did have OpenPLI installed but it kept hanging and now I've gone back to Android.
Is anyone using a MECOOL KIII Pro box?
I just dug out mine after resting it for a few years.
When it comes up it defaults to APPS rather than DTV, which is annoying. Can I change it?
Anyone know of a forum with more MECOOL discussion?
Look here.
All tv box rom rom https://androidfilehost.com/?w=files&flid=333132
Is there a README with this file, or any instructions about what to do with it?
Is it just a img which needs to be copied to USB and rebooted?
OTA update does not work because there is nothing new to update.
KIII Pro is no longer supported
Who was it supported by?
I presume I can still find updates for it on various forums...
Is it possible to do an OTA upgrade with the MECOOL KIII Pro?
I tried but got an error msg saying I didn't have an OTA server agent.
How do I set one up?
How do I find the current firmware version of my MECOOL KIII Pro and the latest available version.
My unit is a few years old and I've only just started using it again, primarily as a DVB-T2 receiver at the moment.
Has anyone ever come across a Samsung Virgin set to box like this one?
https://i.ebayimg.com/images/g/deAAAOSw2g9jEhD-/s-l1600.jpg
Is there anything I can do with this apart from binning it?
Just wondered if there was any way to access it. It has a NIC and I can see that it gets an IP address assigned from my DHCP server, but I can't ping it.
Chromium2 is not for all receiver,if with your receiver you don´t find it in the ATV Feed under Extensions,your receiver can´t support Chromium2.For example with the most HISI receiver chromium2 works.
Does this mean that my receiver is incapable of using Chromium2, or is that it support doesn't currently exist but may be added in the future?
ie is there a hardware restriction?
Go to .ddc ftp and go to this links
user.lib.enigma2.extention.plugin .youtbe tv.
Copy files and paste it to any image I hope it will works smoothly.same netflix as will as to do
Which files do I need and where do I get them from?
I am running OpenATV 7.1 on a Technomate TM-NANO Super 2
Hi , You can tell me if there is a web browser for Enigma2 ? ( for openatv-openpli-ecc)
Very Thanks
chromium. there is a version from april2022
Which category of plugins is it in? I can't locate it.
You have to log into the file, because after the crashing of the Oscam process, it also logically kills the OscamWebif - Live Log.
oscam.conf:
Code[global] disablelog = 0 logfile = /tmp/oscam.log maxlogsize = 500 logduplicatelines = 1
Since I added these changes, Oscam seems much more stable, so I'll stay with the version I have for the time being.
Many thanks for the suggestion, although I don't understand why it should have made a difference..
I seem to get a lot of errors like this in my oscam.log
2022/10/23 15:16:06 0D624679 c (ecm) anonymous (P: 1803::3D5D:0DB5:0000 #ECM_L:92 #CW=9692173FDCB9A83D762D640769752B09 HOP:01): found (528 ms) by cccam_server - Filmbox Premium HD
2022/10/23 15:16:21 0D624679 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Operation not supported
2022/10/23 15:16:21 0D624679 c (ecm) anonymous (P: 1803::3D5D:0DB5:0000 #ECM_L:92 #CW=BDB753C7E4495C89762D640769752B09 HOP:01): found (405 ms) by cccam_server - Filmbox Premium HD
2022/10/29:3 15:16:36 0D624679 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Operation not supported
2022/10/23 15:16:36 0D624679 c (ecm) anonymous (P: 1803::3D5D:0DB5:0000 #ECM_L:92 #CW=BDB753C7E4495C890B75E868D77A0455 HOP:01): found (354 ms) by cccam_server - Filmbox Premium HD
2022/10/23 15:16:51 0D624679 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Operation not supported
2022/10/23 15:16:51 0D624679 c (ecm) anonymous (P: 1803::3D5D:0DB5:0000 #ECM_L:92 #CW=B03AE7D117D606F30B75E868D77A0455 HOP:01): found (653 ms) by cccam_server - Filmbox Premium HD
2022/10/2*3 15:17:07 0D624679 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Operation not supportedCanyone tell me what is wrong and what I can do about?
(sorry for bad formatting.... I managed to paste it as code instead of text by mistake)
You have to log into the file, because after the crashing of the Oscam process, it also logically kills the OscamWebif - Live Log.
oscam.conf:
Code[global] disablelog = 0 logfile = /tmp/oscam.log maxlogsize = 500 logduplicatelines = 1
I have:-
[global]
logfile = /tmp/oscam.log
clienttimeout = 12000
fallbacktimeout = 3000
bindwait = 60
netprio = 1
nice = -1
waitforcards = 0
maxlogsize = 1024
waitforcards = 0
waitforcards_extra_delay = 200
preferlocalcards = 1
readerrestartseconds = 1
dropdups = 1
lb_nbest_readers = 4 #[ To request import ecm from (Number) of readers ]
lb_nfb_readers = 4
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
disablecrccws = 1
cccam_cfg_enabled = 1
cccam_cfg_save = 1
#cccam_cfg_path = /etc
cccam_cfg_repetitions_forced = 1
cccam_cfg_reconnect_delay = 90
cccam_cfg_reconnect_attempts = 10
I have no idea about any of this.
The Oscam launcher option has suddenly gone missing from Open Webif.
Not sure how this happened. Does anyone know how to get it back?
OSCam is probably not installed or you have installed an incompatible version for your receiver.
It seems that Oscam will run for several hours and then stop. I need re-install it and/or restart it several times a day.
How do I log that it has stopped?
Softcams installers and binaries have disappeared from this discussion forum. I am sorry. I do not know why.
Try to find somewhere else... some binary for mipsel architecture, version 11714.
(As example: https://www.digital-eliteboard…/categories/binaries.526/)
I'm having difficulty finding anything....
I was wondering if I could install Oscam on a seperate system...
If the Oscam process freezes, it is probably a bad / incompatible binary file or there is some bad compatibility with the system libraries in your Enigma2. Try another Oscam binary file. You can also download binary files here on this discussion forum. According to the type of your set top box, download the correct binary (mipsel, arm, sh4, aarch64, ...).
As first, stop your Oscam process. Then rename the binary file, according to the current binary, in your device - in the "/usr/bin" folder. And upload it to the set-top box (overwrite it). Check if the binary attributes are set correctly to 755.
I'm using Oscam under OpenATV v7.1 on a Technomate TM-NANO 2 Super which is a mipsel box.
Not sure where to find the most appropriate version of Oscam.
Run-level-3 symbolic link is probably broken. Check the "/etc/rc3.d" directory. There should be a sym-link to this "/etc/init.d/softcam.*" script file. That is, a symbolic-link, for example, like this:
/etc/rc3.d/S90softcam.OSCam_11714-r798
/etc/rc3.d/softcam has a symbolic link /etc/init.d/softcam which has a symbolic link to softcam.OSCam_11.714-r798
So it looks like it is set up correctly, although oscam seems to stop working after some hours, but I know how to restart it now.
But it would be nice to know what the problem is.
Display MoreLooks like oscam has disappeared....
I have just run following which I thought should install oscam but it didn't work....
Nope... the OSCam binary file name can also be called something else. It doesn't have to be exactly "oscam".
Even some Enigma2 distributions place the softcam binary file in some folder other than "/usr/bin" (than other, standard, all current Enigma2 distributions).
Try looking through the top or top -c command at the running processes and find the one that could belong to Oscam (for example, look for the startup parameters belonging to the Oscam process).
Or if you have the opportunity, install and use the htop tool / command. This one is more beautiful (more clear) tool.
Look in the contents of the "/etc/init.d" folder to see if there is a shell script (by name) that is intended for starting a SoftCAM.
If you're going to try anything else with the IPK softcam-installers, back up the oscam configuration files you found in your set-top box ! The IPK softcam-installer could delete your current configuration files.
Many thanks!!!
I ran this, and everything seems to work again
root@tmnano2super:/etc/init.d# ./softcam.OSCam_11714-r798 start
Looks like oscam stopped for some reason and didn't restart after a reboot.
OSCam Webinterface is once again visible as an option in OpenWebif.
Display MoreHi.
Here is the OpenWebif source code. Specifically, an algorithm that looks for an available Oscam in the system and if it finds it... takes the necessary steps:
https://github.com/E2OpenPlugi…/controllers/base.py#L276
According to this code, the presence of Oscam is detected through auxiliary temporary files. However, not every single Oscam that was compiled by some expert will also create these temporary files (by the way, they are hidden, you have to enable their visibility in FTP connection if you want to see them via FTP connection).
Although I'm not sure exactly what you're looking for in Open-Webif (Enigma2-Webif). Don't you mean Oscam-Webif ? Or do you really mean Open-Webif (Enigma2-Webif) ?
How do I run this code?
