hi all
ive got vu+ zero free off me mate. whats the best image to use on it and ive got a motordish to go wth it
thanks
hi all
ive got vu+ zero free off me mate. whats the best image to use on it and ive got a motordish to go wth it
thanks
I use openvix and is, for me, the best image out there, followed by openatv
thanks for that mate, black hole is on it at the mo, how do i set up the Motorised-Dish? im from the north east (near middlesbrough)
the box settings are as at the mo.......
longitude set as 005.1xx east
latitude set as 050.7xx north
dont know if i need to change them
Find your house on google maps and click on it.... it will give you the long & lat co-ordinates..
Input these in where the long & lat settings are now.
it dont come up, if i click were the house is a pic comes up with the address thats it
Use this http://www.dishpointer.com/
Set the tuner like this:
Configuration mode - Simple
Mode - Positioner
Set your lat and long then save.
Display MoreUse this http://www.dishpointer.com/
Set the tuner like this:
Configuration mode - Simple
Mode - Positioner
Set your lat and long then save.
says
Latitude: 54.XXx°
Longitude: -1.XxX°
how do i know whats what? north south east west?
54.xXx is north
-1.XxXX is west
thanks for that. then what should i do just scan it or download a channel list
so its set like this before i change it
longitude set as 005.xxx east
latitude set as 050.xxx north
new one
54.xxxx is north
-1.xxxx is west
it wont let me put how it is, theres only _ _ _ . _ _ _ for long and _ _ _ . _ _ _ for lat and it wont let no put the -1 in just 1
thanks for that. them what should i do just scan it
Its not a good idea posting your lat and long on the open forum. You never know who might read this and knock your door.
You should have autobouquetsmaker pre-installed. Its in the same location as tuner configuration.
Set your area and scan.
thanks for that. them what should i do just scan it
Its not a good idea posting your lat and long on the open forum. You never know who might read this and knock your door.
You should have autobouquetsmaker pre-installed. Its in the same location as tuner configuration.
Set your area and scan.
ha ha aww yeh lol
ive inboxed u mate
You can't input a - sign..... just put 001
You can't input a - sign..... just put 001
got ya thanks but what after that because after the . i got 4 numbers so 001. XxXx same as longitude 54.XxXx
on the setting it only lets you put 3 numbers 123.123 like that wont let me put 54.1234
If you can only input three numbers instead of four then just put the three in.... it doesn't have to be deadly accurate bud.
If you can only input three numbers instead of four then just put the three in.... it doesn't have to be deadly accurate bud.
ok bud i'll give that ago and see how i get on
if the long and lat is wrong in the settings will it knock the dish out slight?
i think the dish may by out a slight because some channels work and some wont they keep breaking up
Of course it will !!!
Everything has to be plumb straight aligned from the holding mount to the motor to the dish to the LNB.
Don´t need to sound impolite but
I suggest instead to start reading as everything you have asked and been answered is already in the HOW TO subforums.
Satellite Setup & Installation (Single Sat, Multi-Sat & Motorised Systems)
If some channels/frequencies are breaking up/pixelating, it could be down to various reasons, such as LNB skew,etc...
Best start reading to get a better picture of how to set up ( forgive the pun)
Don’t have an account yet? Register yourself now and be a part of our community!