OSCam-EMU 11392 IPK For OE2.0 Mips Based Receivers Various Images
- master G
- Thread is marked as Resolved.
-
-
I`ve searched all over the net and tried everything to get powervu channels to work on my duo2 using blackhole image. With no success. Only maxxsat on here says he has them working with the blackhole image but he is using a vu zero. So this has to be vu duo2 problem. Biss channels work fine and the PV symbol goes green when on a powervu channel. I know I have the right keys because I tested the channels using the Openatv image and they cleared. I`m determined to get this working. Can it really be a Vu Duo2 problem?
bo.
-
I`ve searched all over the net and tried everything to get powervu channels to work on my duo2 using blackhole image. With no success. Only maxxsat on here says he has them working with the blackhole image but he is using a vu zero. So this has to be vu duo2 problem. Biss channels work fine and the PV symbol goes green when on a powervu channel. I know I have the right keys because I tested the channels using the Openatv image and they cleared. I`m determined to get this working. Can it really be a Vu Duo2 problem?
bo.
Working fine for me on a Duo2 with latest openPli and the new drivers transfered.
-
It`s the Blackhole image I`m trying with no success. From what I can gather, no one has this working on a duo2 using the latest Blackhole image.
bo.
-
It`s the Blackhole image I`m trying with no success. From what I can gather, no one has this working on a duo2 using the latest Blackhole image.
bo.
Its not using the latest driver yet though so its not going to work.
-
i think there is a problem on vu+ duo2 that blocks pv channels on that box using BH... all others images are ok with pv channels..
-
the erros is:
2017/11/10 22:43:01 55EDC059 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:97426B8DA3B4BBD0E23B337FD591CD77): found (4 ms) by emulator - HD SPORTS
2017/11/10 22:43:02 55EDC059 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2017/11/10 22:43:02 55EDC059 c (-) -- Skipped 4 duplicated log liImprovements the good-guys have made in release version 756 [at least when applied to 11392 in OpenATV] have corrected this error:
"(dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument"
& this error:
"(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument"
See my post here (in this forum):
OSCam-EMU 11392 IPK For OE2.0 Mips Based Receivers Various Images
-
It`s the Blackhole image I`m trying with no success. From what I can gather, no one has this working on a duo2 using the latest Blackhole image.
bo.
Its not using the latest driver yet though so its not going to work.
So the updated drivers posted here are no good then?
VU+ Drivers Update (duo2, solo2, solose, zero) 07.11.2017 - ! without stream relay !
bo.
-
It`s the Blackhole image I`m trying with no success. From what I can gather, no one has this working on a duo2 using the latest Blackhole image.
bo.
Its not using the latest driver yet though so its not going to work.
So the updated drivers posted here are no good then?
VU+ Drivers Update (duo2, solo2, solose, zero) 07.11.2017 - ! without stream relay !
bo.
Try for yourself overwrite your driver and reboot it will most probably not start so backup your image and have it ready on a usb stick. it may of been openBlachole with the driver issue
-
Yeah I tried again just to be sure. It doesn`t reboot.
bo.
-
Yeah I tried again just to be sure. It doesn`t reboot.
bo.
There you go mate drivers not compatible so PowerVU without stream relay does not work on blackhole.
OpenPLI as ive said is a good choice to use with those drivers.
-
Tried openpli and openatv, sorry but they`re not for me. I like everything simplified, that`s why me and Blackhole get on fine. Those images just seem to be cluttered with unnecessary paths to what I want to do in the operation of the receiver. Just my opinion. :S
Thanx for your help.
bo.
-
Latest OSCam-EMU 11392 with configs for PowerVU without stream relay and SoftCam.Key by W@Rp for non 4K receivers. vuplus, mutant, Xtrend, Spycat, Edision, Octagon, Dreambox, Zgemma, Gigablue, Technomate, Formuler, Xspeed, Miraclebox, Venton unibox.
Hello,
Which version should I install on a Zgemma H.2H with Egami 8.0.6 ?
-
waiting for Emu r758
-
Hello, which image and oscam file are more appropriate in order to have powervu (satellites: 75W ; 65W) and auto-roll working on a Dreambox 7020HDv2? Thank you in advance for your advice.
-
OpenPLI ,OpenATV and VTI have the correct drivers in their latest images to run powervu without steamrelay with this version of oscam.
-
Hi friends
How can i install oscam on the image without memory/ tmp ?? it just has internal flash...how do i access internal flash to install oscam file??? I do not know how to use telnet on dcc any step by step guide??? There are good images but do not have important features??? Can powervu work on any image or its just on openpli and openatv????
-
I do not know how to use telnet on dcc any step by step guide
Copy the ipk file on to a usb stick. Insert into the receiver. Follow on screen instructions.
Can powervu work on any image or its just on openpli and openatv????
powervu works on all images, not just the two you mentioned.
-
Hi everyone,
I try for days to open the Powervu channels with my Octagon SF4008, but no success.
I run image Pure2 6.1 and have this version of oscam installed : enigma2-plugin-softcams-oscam.emu-11392_pure2_all.ipk
I tested under cccam protocol and it is working.
But I can't open the PV channels yet...
-
Hi everyone,
I try for days to open the Powervu channels with my Octagon SF4008, but no success.
I run image Pure2 6.1 and have this version of oscam installed : enigma2-plugin-softcams-oscam.emu-11392_pure2_all.ipk
I tested under cccam protocol and it is working.
But I can't open the PV channels yet...
This topic is not for you 'cause Octagon SF4008 is an arm based receiver, try here: OSCam-EMU 11392 IPK For Arm Based Receivers Various Images
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!