were do i find the ECM whitelist its not in my config files
AFN’s switch to HD
-
- PowerVU Support
- matu2
- Closed
- Thread is marked as Resolved.
-
-
if i change the channel fast and back to the one i was on the image will play for a couple of seconds then stop
-
In Oscam, Readers, select AFN, scroll down in ECM whitelist field and leave blank that field.
-
In Oscam, Readers, select AFN, scroll down in ECM whitelist field and leave blank that field.
thank you that has fixed it
-
Attached is the working AFN config just replace it all files and it will work
-
In Oscam, Readers, select AFN, scroll down in ECM whitelist field and leave blank that field.
It is irrelevant whether it's with it or not, I personally never used this option...and work without that of course...
To get emm you do not need to wait longer than 4 minutes on some AFN channels...and voila...keys are there:
QuoteP 9E0077 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0078 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0068 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E006A 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E006C 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0069 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E006B 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E006D 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0066 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0067 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0191 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0083 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0087 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E008B 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E007B 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0084 00 08B585A1486B6F ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0078 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0068 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E006A 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E006C 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0069 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E006B 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E006D 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0066 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0067 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0191 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0083 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0087 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E008B 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E007B 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
P 9E0084 01 F7AE1FC9508B4D ; added by OSEmu Fri Oct 19 10:15:37 2018 UA: 003E7E84
-
Managed to get AFN running on Vu+ Solo2 OpenBH 4.2 - but seem to have lost BISS channels! According to log it has "Demuxer 0 no suitable readers found that can be used for decoding!". Anyone else with same issue? and how to fix it - presumably in the oscam.server file, but I'm no expert.
-
If you had the previous softcam.key then copy the BIss key and put it in the new one
-
I don't think the key is the issue, I have copied the working keys into SoftCam.Key, but I'm not sure reader is correctly looking for it. There is a reader in the server file that contains:
label = constant.cw
protocol = constcw
device = /usr/keys/constant.cw
services = !afn
caid = 2600
group = 1
However, /user/keys contains no files and everything is in /etc/tuxbox/config. So I suspect this reader needs to be redirected and maybe even called SoftCam.Key??
UPDATE: Sorted now.
-
Attached is the working AFN config just replace it all files and it will work
THX, Vu UNo 4k working again with AFN
-
New keys just AU EMM added...works all perfect and without interruption...
QuoteP 9E0078 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0068 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E006A 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E006C 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0069 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E006B 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E006D 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0066 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0067 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0191 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0083 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0087 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E008B 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E007B 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0084 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
-
Keys 01 again changed after 2h and 43 minutes...last changes was in 14:43h
P 01 032198C7A092AA ; added by OSEmu Fri Oct 19 17:27:40 2018 UA: 001798FE
-
New keys just AU EMM added...works all perfect and without interruption...
QuoteP 9E0078 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0068 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E006A 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E006C 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0069 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E006B 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E006D 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0066 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0067 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0191 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0083 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0087 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E008B 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E007B 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
P 9E0084 01 7784544E45B3FB ; added by OSEmu Fri Oct 19 13:49:25 2018 UA: 001798FE
hi mate
what is the needed settings for AFN to autoupdate
how do i get this and were do you put it on config files?
cheers
-
Nothing special. I just copy oscam -11436 from today's post and wait 2-3 min
-
the above,if you had already set in the past...
if not,than you need also emm keys in softcam.key, and a few settings in oscam reader...
-
to BAF 603:
Could you please upload a valid version of your Oscam AFN Working config.rar ?
the one posted above is corrupted....
Thanks
-
its not corrupt check it someone uses it and they reported that it working fine
-
-
to BAF 603
My fault ! I was using an old version of WinRAR that couldnt unzip the file ....After upgrading ,all is OK ...
Thanks for your help !
-
Attached is the working AFN config just replace it all files and it will work
There is no afn service in this configuration. How does it work for other pwv channels?
[reader]
label = emulator
protocol = emu
device = emulator
# services = !afn
cacheex = 0
cacheex_maxhop = 0
cacheex_allow_request = 0
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
...
[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = Emulator
# services = afn
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
How does oscam know when to use which reader?
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!