DM520HD : BlackPole 6++ IPTV (Original)

**emosim** · Apr 18th 2018

- Based on BlackPole 6++ by Japhar

- Python 2.7.12, GStreamer 1.12.4 Stable

- Feeds online (For Wifi/DVB-T Dongles)

- Triple/Trial Tuner supported

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV/VoD Support with Built-in 1300 FTA FREE IPTV Channels

- JAM 5.3 built-in (Plugins/Addons)

- Support by Japhar Team

**atlas35** · Apr 18th 2018

this bug include imaj..

**emosim** · Apr 18th 2018

Thank you for your feedback. Yes, hopefully then it will not appear again and on the DM520HD there is no CI.

Emo

**atlas35** · Apr 18th 2018

Quote from emosim

Thank you for your feedback. Yes, hopefully then it will not appear again and on the DM520HD there is no CI.

Emo

my device dm525

**emosim** · Apr 18th 2018

Only for DM520HD

maior · Apr 18th 2018

Hi

It works in Dreambox 520 hd Clone ?

Thank you

**atlas35** · Apr 18th 2018

Quote from maior

Hi

It works in Dreambox 520 hd Clone ?

Thank you

Orginal dm525

**emosim** · Apr 18th 2018

Check here, for Clone but WITH JAPHAR Sim,

DM520HD : BlackPole 6++ IPTV Japhar

Emo

Quote from maior

Hi

It works in Dreambox 520 hd Clone ?

Thank you

zipto · Apr 19th 2018

this is Clear Image i mean any bugs?

**emosim** · Apr 19th 2018

It's first release, so there is some little things to be fixed, but globally it works fine.

Emo

Quote from zipto

this is Clear Image i mean any bugs?

**ak2013** · Apr 21st 2018

Not for original dm525

**emosim** · Apr 21st 2018

DM520 images should work on DM525,

Emo

**ak2013** · Apr 21st 2018

failing to install on dm525

**emosim** · Apr 21st 2018

Do you just read the log (that naturally has errors, it's normal) or did you flash the image and booted the box ? Many just stop because they see that some files are missing at flash (but not all files are necessary to have a working box/image/software).

Emo

Quote from ak2013

failing to install on dm525

**ak2013** · Apr 21st 2018

I tried in install but failed says fatal error occurred.....

**ak2013** · Apr 21st 2018

HI emosim

Failing to install check error message below

Code

[*] Removing volume 0 from /dev/ubi0
[*] Creating volume 0 on /dev/ubi0 (dreambox-rootfs)
Set volume size to 502697984
Volume ID 0, size 3959 LEBs (502697984 bytes, 479.4 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "dreambox-rootfs", alignment 1
[*] Creating ubifs filesystem on /dev/ubi0_0
[*] Mounting '/dev/ubi0_0' to '/mnt'
[*] Extracting '/tmp/FRxeCm' to '/mnt'
[*] Mounting '/dev' to '/mnt/dev'
[*] Mounting '/proc' to '/mnt/proc'
[*] Mounting '/run' to '/mnt/run'
[*] Mounting '/sys' to '/mnt/sys'
[*] Mounting '/tmp' to '/mnt/tmp'
/usr/sbin/flash-ssbl: line 23: stat: not found
sh: bad number
Fatal: Boot image is too big
Fatal: Failed to run dreambox-secondstage.postinst
[*] Unmounting '/mnt/tmp'
[*] Unmounting '/mnt/sys'
[*] Unmounting '/mnt/run'
[*] Unmounting '/mnt/proc'
[*] Unmounting '/mnt/dev'
[*] Unmounting '/mnt'

Display More

**emosim** · Apr 21st 2018

No fatal error at all, just as it's normal some files are not as it would expect, as the OpenXXX images are not DMM images... image cannot be "too big", look at the Flash available and the size of the image compressed (tar.gz) and uncompressed (tar)... far less than the Flash of the box.

So this is a "normal Flash", and the box will work just fine after, I have the same when I flash my two DM520HD (Original and Clone with Japhar Sim).

Emo

**ak2013** · Apr 21st 2018

Hi emosim

It has finally installed though giving errors

You are right it is now working

**emosim** · Apr 21st 2018

There is few updates since the release of the published image, so you can always apply the online update (or send the command line update, opkg update then opkg upgrade), to get the latest. Team is working on fixing what needs, as it's a very new image only few days old, so the feedbacks of the members point out where to look and fix when time is available.

Enjoy,

Emo

**ak2013** · Apr 21st 2018

Hi emosim

Thanks looks great better than the common blackhole ...satfinder is not working..it crashes may be is part of the upgrade..

Thanks Good work keep it up..Great and very nice image with rich interface

DM520HD : BlackPole 6++ IPTV (Original)

Firmware images and flashing support for the Dreambox DM520HD / DM525HD / DM520HD Mini.

Share

Similar Threads

DM520HD : BlackPole 6++ IPTV (Original)

Tags

LinuxSat Community

Firmware Images

Receiver Support

Plugins & Tools

Resources