Quote from master G

Have you tried recovering bad sectors with Dreambox Optiflasher ?

Hi seniors

i m facing a problem in my DM800SE Clone sim 2.10

some time its stuking on boot on loading. when i reflash it with new image. it work for some time & after it screen flick & again hang. i switch off and again on then work but after few minute flick and hang, than never boot & stuck on loading. plz help in this.

i flash the image via OptiFlasher with bad sector recovery option, but program not show bad sector recovered info, kindly help.

i change the adopter but same result kindly help me, and guide me step by step.

i use window seven, how to use this command on window seven

because click Start > Run > telnet ip.address.of.dm800 >

not open dm bios

Quote from master G

Try enabling Flash Sector Recovery in the bios..

1) Power off the DM800.

2) Press and hold the power button on the front panel, power on the DM800, you should now be in flash mode.

3) If you are using windows O/S click Start > Run > telnet ip.address.of.dm800 > Press Enter, you are now in the bios..

4) Enable Flash Sector Recovery > Exit & Save settings..

611e3bc4ee3e00ef1c3ee5.jpg

Training to enter the BIOS Receivers Dreambox via Hyper Terminal program

Display More

i use this method but Dreambox Advance setup utility not open

i put ip address without com1 this dailouge appear 23d5952e6a016.jpg