Hi friend
in her the backup for black hole 3.0.2 image for spark7111
DOWNLOAD
http://linuxsat-support.com/sh…GM_sparkreloaded-Sti-7111
There are 46 replies in this Thread which was already clicked 26,680 times. The last Post () by ahmed gazye.
Hi friend
in her the backup for black hole 3.0.2 image for spark7111
DOWNLOAD
http://linuxsat-support.com/sh…GM_sparkreloaded-Sti-7111
good job team...:)
Hello, I can't download from feed and when I try to make an opkg update i got an error
ba5186560b4fa585d46.png
Can anyone help please?
Hello my friend
its not a official release its just a compilation
no server no feed
hi all ;
i've installed this image but all of oscam & mgcamd don't work. i tried to install cccam but with no effect too.
can anybody help me ?
- - - Updated - - -
hi all ;
i've installed this image but all of oscam & mgcamd don't work. i tried to install cccam but with no effect too.
can anybody help me ?
you need sh4 oscam. not mipsel oscam
i also had this problem so be aware. This is an SH4 Box. CCcam for dreambox will not work.
salut à vous tous !!
Comment installer cette image ?
merci beaucoup de votre aide les Amis
Hello to you all!!
How to install this image ?
Thank you very much of your help the Friends
which box?
The Box is
GI S8120E = Spark sti7111
Enigma2 load instead of the official firmware
A. Switch off the receiver.
B. Press and hold the OK button on the front panel.
C. Switch on the receiver.
D. After about 5 seconds, the display shows [Forc]. Release the Ok button. Then, press the Up button. The display shows [EN16].
E. Click OK to accept the burden. The receiver will restart automatically.
Charge place of Enigma2, official firmware
A. Switch off the receiver.
B. Press and hold the OK button on the front panel.
C. Switch on the receiver.
D. After about 5 seconds, the display shows [Forc]. Release the Ok button. Then, press the Up button. The display shows [SPAR].
E. Click OK to accept the startup. The receiver will restart automatically.
S8120 Gi Enigma2
1. Take the flash drive formatted in FAT32, you must have a partition.
2. In the root directory create an enigma2 folder.
3. In this folder, extract two files from the file downloaded in the link above (2 files: uImage and e2jffs2.img).
4. To install Enigma should be transferred to the receiver when the receiver is in Enigma boot mode, see explanation above.
5. Insert a USB flash drive into the receiver.
6. On the front panel, press and hold the OK button.
7. Turn on the receiver.
8. After about 5 seconds, the display shows [Forc]. Release the Ok button. Then press the right button. If all goes well, then the display shows [U LD]. The installation process will begin Enіgma.
The installation process will take about 5 minutes. If the update is successful, the receiver screen displays [SUCC] and the receiver will restart.
If it takes more than 5 minutes and the process is not complete, then something went wrong.
Of course, all types of flash drives are not recognized by the receiver, the manufacturer recommends using Kingston
Good luck!
I just installed your backup.
I thought it was a great backup.
I would like to know how to configure mgcamd. if you can help me, I would be very grateful.
Use oscam. Configs are in /etc/tuxbox/config
Hello!
I have problem with this image when resolution is 1920x1080 (with HD channels), the all menus are flickering. When watching non HD or lower resolution channels everything is OK.
Tuner is GM Spark Reloaded.
Am I doing something wrong or I need to change something to fix it? :/
Am I doing something wrong or I need to change something to fix it?
Have you tried changing the video mode or refresh rate ?
Yes I try to change video mode. I do deep restart .... Seems that right now everything is ok.I keep my eyes to it.
It´s mine first time to install enigma2. Before I use official Spark Image, but there the channel change takes time if used cccam.
One questtion more, I had 4 LNB-s , but I dont understand how to use all 4 ? First 2 , like Astra 19,2 E and Hotbird 13,0 E works OK but other Astra 4,8 E and Thor 0,8 W not? I cant do automatic channel search.
Is it possible to add all satelitte channels to list without searching?
I cant do automatic channel search.
it is something like "rule" ,that in enigma2 we do not do "auto search" . do a manual search and full satellite...
check this,and if again you will not find channels,than we can check your diseq config...
Thank you for suggestions. Seems that everything works now. In seach window was NET SCAN- NO and that was whole problem . I change it to YES and voila, all channels are in my list.
Regards
I have a major problem with this image which is That IT IS MISSING HOTKEY . I want to specify the red, green. blue and yellow keys to run plugins. It is the first image that is missing hotkey in its menus. Any suggestions?? I tried to import hotkey.py from GitHub in this link
https://github.com/openhdf/eni…/python/Screens/Hotkey.py
and put it in the right path enigma2/lib/python/Screens but my blackhole image stopped working and didn't load and kept crashing. I had to return to the orignal version of the file and the image could load and run well. Any suggestion guys/// Please help georgeflu master G enigma1969 juvent11
Good image
Don’t have an account yet? Register yourself now and be a part of our community!